fixup! New: (Cardigann) Paging Support

Co-Authored-By: Bogdan <mynameisbogdan@users.noreply.github.com>

.editorconfig

@@ -19,10 +19,10 @@ indent_size = 4
 dotnet_sort_system_directives_first = true
 
 # Avoid "this." and "Me." if not necessary
-dotnet_style_qualification_for_field = false:refactoring
+dotnet_style_qualification_for_field = false:warning
-dotnet_style_qualification_for_property = false:refactoring
+dotnet_style_qualification_for_property = false:warning
-dotnet_style_qualification_for_method = false:refactoring
+dotnet_style_qualification_for_method = false:warning
-dotnet_style_qualification_for_event = false:refactoring
+dotnet_style_qualification_for_event = false:warning
 
 # Indentation preferences
 csharp_indent_block_contents = true
@@ -32,10 +32,6 @@ csharp_indent_case_contents_when_block = true
 csharp_indent_switch_labels = true
 csharp_indent_labels = flush_left
 
-dotnet_style_qualification_for_field = false:suggestion
-dotnet_style_qualification_for_property = false:suggestion
-dotnet_style_qualification_for_method = false:suggestion
-dotnet_style_qualification_for_event = false:suggestion
 dotnet_naming_style.instance_field_style.capitalization = camel_case
 dotnet_naming_style.instance_field_style.required_prefix = _
 
@@ -121,7 +117,6 @@ dotnet_diagnostic.CA1003.severity = suggestion
 dotnet_diagnostic.CA1008.severity = suggestion
 dotnet_diagnostic.CA1010.severity = suggestion
 dotnet_diagnostic.CA1012.severity = suggestion
-dotnet_diagnostic.CA1014.severity = suggestion
 dotnet_diagnostic.CA1016.severity = suggestion
 dotnet_diagnostic.CA1017.severity = suggestion
 dotnet_diagnostic.CA1018.severity = suggestion
@@ -167,6 +162,7 @@ dotnet_diagnostic.CA1309.severity = suggestion
 dotnet_diagnostic.CA1310.severity = suggestion
 dotnet_diagnostic.CA1401.severity = suggestion
 dotnet_diagnostic.CA1416.severity = suggestion
+dotnet_diagnostic.CA1419.severity = suggestion
 dotnet_diagnostic.CA1507.severity = suggestion
 dotnet_diagnostic.CA1508.severity = suggestion
 dotnet_diagnostic.CA1707.severity = suggestion
@@ -182,9 +178,6 @@ dotnet_diagnostic.CA1720.severity = suggestion
 dotnet_diagnostic.CA1721.severity = suggestion
 dotnet_diagnostic.CA1724.severity = suggestion
 dotnet_diagnostic.CA1725.severity = suggestion
-dotnet_diagnostic.CA1801.severity = suggestion
-dotnet_diagnostic.CA1802.severity = suggestion
-dotnet_diagnostic.CA1805.severity = suggestion
 dotnet_diagnostic.CA1806.severity = suggestion
 dotnet_diagnostic.CA1810.severity = suggestion
 dotnet_diagnostic.CA1812.severity = suggestion
@@ -196,13 +189,14 @@ dotnet_diagnostic.CA1819.severity = suggestion
 dotnet_diagnostic.CA1822.severity = suggestion
 dotnet_diagnostic.CA1823.severity = suggestion
 dotnet_diagnostic.CA1824.severity = suggestion
+dotnet_diagnostic.CA1835.severity = suggestion
+dotnet_diagnostic.CA1845.severity = suggestion
+dotnet_diagnostic.CA1848.severity = suggestion
+dotnet_diagnostic.CA1849.severity = suggestion
 dotnet_diagnostic.CA2000.severity = suggestion
 dotnet_diagnostic.CA2002.severity = suggestion
 dotnet_diagnostic.CA2007.severity = suggestion
 dotnet_diagnostic.CA2008.severity = suggestion
-dotnet_diagnostic.CA2009.severity = suggestion
-dotnet_diagnostic.CA2010.severity = suggestion
-dotnet_diagnostic.CA2011.severity = suggestion
 dotnet_diagnostic.CA2012.severity = suggestion
 dotnet_diagnostic.CA2013.severity = suggestion
 dotnet_diagnostic.CA2100.severity = suggestion
@@ -233,6 +227,7 @@ dotnet_diagnostic.CA2243.severity = suggestion
 dotnet_diagnostic.CA2244.severity = suggestion
 dotnet_diagnostic.CA2245.severity = suggestion
 dotnet_diagnostic.CA2246.severity = suggestion
+dotnet_diagnostic.CA2254.severity = suggestion
 dotnet_diagnostic.CA3061.severity = suggestion
 dotnet_diagnostic.CA3075.severity = suggestion
 dotnet_diagnostic.CA3076.severity = suggestion
@@ -259,6 +254,7 @@ dotnet_diagnostic.CA5385.severity = suggestion
 dotnet_diagnostic.CA5392.severity = suggestion
 dotnet_diagnostic.CA5394.severity = suggestion
 dotnet_diagnostic.CA5397.severity = suggestion
+dotnet_diagnostic.CA5401.severity = suggestion
 
 dotnet_diagnostic.SYSLIB0014.severity = none
 

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -5,9 +5,9 @@ body:
 - type: checkboxes
   attributes:
     label: Is there an existing issue for this?
-    description: Please search to see if an issue already exists for the bug you encountered.
+    description: Please search to see if an open or closed issue already exists for the bug you encountered. If a bug exists and is closed note that it may only be fixed in an unstable branch.
     options:
-    - label: I have searched the existing issues
+    - label: I have searched the existing open and closed issues
       required: true
 - type: textarea
   attributes:

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -5,9 +5,9 @@ body:
 - type: checkboxes
   attributes:
     label: Is there an existing issue for this?
-    description: Please search to see if an issue already exists for the feature you are requesting.
+    description: Please search to see if an open or closed issue already exists for the feature you are requesting. If a request exists and is closed note that it may only be fixed in an unstable branch.
     options:
-    - label: I have searched the existing issues
+    - label: I have searched the existing open and closed issues
       required: true
 - type: textarea
   attributes:

.github/label-actions.yml

@@ -0,0 +1,16 @@
+# Configuration for Label Actions - https://github.com/dessant/label-actions
+
+'Type: Support':
+  comment: >
+    :wave: @{issue-author}, we use the issue tracker exclusively
+    for bug reports and feature requests. However, this issue appears
+    to be a support request. Please hop over onto our [Discord](https://prowlarr.com/discord) 
+    or [Subreddit](https://reddit.com/r/prowlarr)
+  close: true
+
+'Type: Indexer Request':
+  comment: >
+    :wave: @{issue-author}, we use the issue tracker exclusively
+    for bug reports and feature requests. However, this issue appears
+    to be a indexer request. Please use our Indexer request [site](https://requests.prowlarr.com/)
+  close: true

.github/workflows/azuresync.yml

@@ -1,41 +0,0 @@
-name: Sync issue to Azure DevOps work item
-
-on:
-  issues:
-    types:
-      [opened, edited, deleted, closed, reopened, labeled, unlabeled, assigned]
-
-concurrency: azuresync-${{ github.event.issue.number }}
-
-jobs:
-  alert:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: danhellem/github-actions-issue-to-work-item@master
-        if: "${{ contains(github.event.issue.labels.*.name, 'Type: Bug') == true }}"
-        env:
-          ado_token: "${{ secrets.ADO_PERSONAL_ACCESS_TOKEN }}"
-          github_token: "${{ github.token }}"
-          ado_organization: "Servarr"
-          ado_project: "Servarr"
-          ado_area_path: "Servarr\\Prowlarr"
-          ado_wit: "Bug"
-          ado_new_state: "New"
-          ado_active_state: "Active"
-          ado_close_state: "Closed"
-          ado_bypassrules: true
-          log_level: 100
-      - uses: danhellem/github-actions-issue-to-work-item@master
-        if: "${{ contains(github.event.issue.labels.*.name, 'Type: Bug') == false }}"
-        env:
-          ado_token: "${{ secrets.ADO_PERSONAL_ACCESS_TOKEN }}"
-          github_token: "${{ github.token }}"
-          ado_organization: "Servarr"
-          ado_project: "Servarr"
-          ado_area_path: "Servarr\\Prowlarr"
-          ado_wit: "User Story"
-          ado_new_state: "New"
-          ado_active_state: "Active"
-          ado_close_state: "Closed"
-          ado_bypassrules: true
-          log_level: 100

.github/workflows/label-actions.yml

@@ -0,0 +1,23 @@
+name: 'Label Actions'
+
+on:
+  issues:
+    types: [labeled, unlabeled]
+  pull_request:
+    types: [labeled, unlabeled]
+  discussion:
+    types: [labeled, unlabeled]
+
+permissions:
+  contents: read
+  issues: write
+  pull-requests: write
+  discussions: write
+
+jobs:
+  action:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: dessant/label-actions@v2
+        with:
+          process-only: 'issues, prs'

.github/workflows/support.yml

@@ -1,21 +0,0 @@
-name: 'Support requests'
-
-on:
-  issues:
-    types: [labeled, unlabeled, reopened]
-
-jobs:
-  support:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: dessant/support-requests@v2
-        with:
-          github-token: ${{ github.token }}
-          support-label: 'Type: Support'
-          issue-comment: >
-            :wave: @{issue-author}, we use the issue tracker exclusively
-            for bug reports and feature requests. However, this issue appears
-            to be a support request. Please hop over onto our [Discord](https://prowlarr.com/discord) 
-            or [Subreddit](https://reddit.com/r/prowlarr)
-          close-issue: true
-          lock-issue: false

.gitignore

@@ -188,6 +188,10 @@ packages.config.md5sum
 **/.idea/**/*.iml
 **/.idea/**/contentModel.xml
 **/.idea/**/modules.xml
+
 # ignore node_modules symlink
 node_modules
 node_modules.nosync
+
+# API doc generation
+.config/

CODE_OF_CONDUCT.md

@@ -0,0 +1,132 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, caste, color, religion, or sexual
+identity and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the overall
+  community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or advances of
+  any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email address,
+  without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+<development@prowlarr.com>.
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series of
+actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or permanent
+ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior, harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within the
+community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.1, available at
+[https://www.contributor-covenant.org/version/2/1/code_of_conduct.html][v2.1].
+
+Community Impact Guidelines were inspired by
+[Mozilla's code of conduct enforcement ladder][Mozilla CoC].
+
+For answers to common questions about this code of conduct, see the FAQ at
+[https://www.contributor-covenant.org/faq][FAQ]. Translations are available at
+[https://www.contributor-covenant.org/translations][translations].
+
+[homepage]: https://www.contributor-covenant.org
+[v2.1]: https://www.contributor-covenant.org/version/2/1/code_of_conduct.html
+[Mozilla CoC]: https://github.com/mozilla/diversity
+[FAQ]: https://www.contributor-covenant.org/faq
+[translations]: https://www.contributor-covenant.org/translations

README.md

@@ -4,74 +4,81 @@
 [![Translated](https://translate.servarr.com/widgets/servarr/-/prowlarr/svg-badge.svg)](https://translate.servarr.com/engage/prowlarr/?utm_source=widget)
 [![Docker Pulls](https://img.shields.io/docker/pulls/hotio/prowlarr.svg)](https://wiki.servarr.com/prowlarr/installation#docker)
 ![Github Downloads](https://img.shields.io/github/downloads/Prowlarr/Prowlarr/total.svg)
-[![Backers on Open Collective](https://opencollective.com/Prowlarr/backers/badge.svg)](#backers) 
+[![Backers on Open Collective](https://opencollective.com/Prowlarr/backers/badge.svg)](#backers)
 [![Sponsors on Open Collective](https://opencollective.com/Prowlarr/sponsors/badge.svg)](#sponsors)
+[![Mega Sponsors on Open Collective](https://opencollective.com/Prowlarr/megasponsors/badge.svg)](#mega-sponsors)
 
-Prowlarr is an indexer manager/proxy built on the popular arr .net/reactjs base stack to integrate with your various PVR apps. Prowlarr supports management of both Torrent Trackers and Usenet Indexers. It integrates seamlessly with Lidarr, Mylar3, Radarr, Readarr, and Sonarr offering complete management of your indexers with no per app Indexer setup required (we do it all).
+Prowlarr is an indexer manager/proxy built on the popular \*arr .net/reactjs base stack to integrate with your various PVR apps. Prowlarr supports management of both Torrent Trackers and Usenet Indexers. It integrates seamlessly with Lidarr, Mylar3, Radarr, Readarr, and Sonarr offering complete management of your indexers with no per app Indexer setup required (we do it all).
 
-## Major Features Include:
+## Major Features Include
-- Usenet support for 24 indexers natively, including Headphones VIP, and support for any Newznab compatible indexer via "Generic Newznab"
+
+- Usenet support for 24 indexers natively, including Headphones VIP
+- Usenet support for any Newznab compatible indexer via "Generic Newznab"
 - Torrent support for over 500 trackers with more added all the time
 - Torrent support for any Torznab compatible tracker via "Generic Torznab"
-- Indexer Sync to Sonarr/Radarr/Readarr/Lidarr/Mylar3, so no manual configuration of the other applications are required
+- Support for custom YML definitions via Cardigann that includes JSON and XML parsing
+- Indexer Sync to Lidarr/Mylar3/Radarr/Readarr/Sonarr, so no manual configuration of the other applications are required
 - Indexer history and statistics
 - Manual searching of Trackers & Indexers at a category level
-- Support for pushing releases directly to your download clients from Prowlarr
+- Parameter based manual searching
+- Support for pushing multiple releases at once directly to your download clients from Prowlarr
 - Indexer health and status notifications
 - Per Indexer proxy support (SOCKS4, SOCKS5, HTTP, Flaresolverr)
 
 ## Support
-Note: Prowlarr is currently early in life, thus bugs should be expected
 
+[![Wiki](https://img.shields.io/badge/servarr-wiki-181717.svg?maxAge=60)](https://wiki.servarr.com/prowlarr)
 [![Discord](https://img.shields.io/badge/discord-chat-7289DA.svg?maxAge=60)](https://prowlarr.com/discord)
 [![Reddit](https://img.shields.io/badge/reddit-discussion-FF4500.svg?maxAge=60)](https://www.reddit.com/r/Prowlarr)
+
+Note: GitHub Issues are for Bugs and Feature Requests Only
+
 [![GitHub - Bugs and Feature Requests Only](https://img.shields.io/badge/github-issues-red.svg?maxAge=60)](https://github.com/Prowlarr/Prowlarr/issues)
-[![Wiki](https://img.shields.io/badge/servarr-wiki-181717.svg?maxAge=60)](https://wiki.servarr.com/prowlarr)
 
-## Indexers/Trackers
+## Indexers & Trackers
 
-[Supported Indexers](https://wiki.servarr.com/en/prowlarr/supported-indexers)
+[![Supported Indexers](https://img.shields.io/badge/Supported%20Indexers-View%20all%20currently%20supported%20indexers%20%26%20trackers-important)](https://wiki.servarr.com/en/prowlarr/supported-indexers)
 
-[Indexer Requests](https://requests.prowlarr.com)
+[![Indexer Requests](https://img.shields.io/badge/Indexer%20Requests-Create%20and%20view%20existing%20requests%20for%20trackers%20and%20indexers-informational)](https://requests.prowlarr.com)
-- Request or vote on an existing request for a new tracker/indexer
 
 ## Contributors & Developers
 
+[API Documentation](https://prowlarr.com/docs/api/)
+
+This project exists thanks to all the people who contribute.
+
 - [Contribute (GitHub)](CONTRIBUTING.md)
 - [Contribution (Wiki Article)](https://wiki.servarr.com/prowlarr/contributing)
-- [YML Indexer Defintion (Wiki Article)](https://wiki.servarr.com/prowlarr/cardigann-yml-definition)
+- [YML Indexer Definition (Wiki Article)](https://wiki.servarr.com/prowlarr/cardigann-yml-definition)
 
-This project exists thanks to all the people who contribute. 
+[![Contributors List](https://opencollective.com/Prowlarr/contributors.svg?width=890&button=false)](https://github.com/Prowlarr/Prowlarr/graphs/contributors)
-<a href="https://github.com/Prowlarr/Prowlarr/graphs/contributors"><img src="https://opencollective.com/Prowlarr/contributors.svg?width=890&button=false" /></a>
 
 ## Backers
 
 Thank you to all our backers! 🙏 [Become a backer](https://opencollective.com/Prowlarr#backer)
-
+![Backers List](https://opencollective.com/Prowlarr/backers.svg?width=890)
-<img src="https://opencollective.com/Prowlarr/backers.svg?width=890"></a>
 
 ## Sponsors
 
 Support this project by becoming a sponsor. Your logo will show up here with a link to your website. [Become a sponsor](https://opencollective.com/Prowlarr#sponsor)
-
+![Sponsors List](https://opencollective.com/Prowlarr/sponsors.svg?width=890)
-<img src="https://opencollective.com/Prowlarr/sponsors.svg?width=890"></a>
 
 ## Mega Sponsors
 
-<img src="https://opencollective.com/Prowlarr/tiers/mega-sponsor.svg?width=890"></a>
+![Mega Sponsors List](https://opencollective.com/Prowlarr/tiers/mega-sponsor.svg?width=890)
 
 ## JetBrains
+
 Thank you to [<img src="/Logo/jetbrains.svg" alt="JetBrains" width="32"> JetBrains](http://www.jetbrains.com/) for providing us with free licenses to their great tools.
 
-* [<img src="/Logo/resharper.svg" alt="ReSharper" width="32"> ReSharper](http://www.jetbrains.com/resharper/)
+- [<img src="/Logo/resharper.svg" alt="ReSharper" width="32"> ReSharper](http://www.jetbrains.com/resharper/)
-* [<img src="/Logo/webstorm.svg" alt="WebStorm" width="32"> WebStorm](http://www.jetbrains.com/webstorm/)	
+- [<img src="/Logo/webstorm.svg" alt="WebStorm" width="32"> WebStorm](http://www.jetbrains.com/webstorm/)
-* [<img src="/Logo/rider.svg" alt="Rider" width="32"> Rider](http://www.jetbrains.com/rider/)	
+- [<img src="/Logo/rider.svg" alt="Rider" width="32"> Rider](http://www.jetbrains.com/rider/)
-* [<img src="/Logo/dottrace.svg" alt="dotTrace" width="32"> dotTrace](http://www.jetbrains.com/dottrace/)
+- [<img src="/Logo/dottrace.svg" alt="dotTrace" width="32"> dotTrace](http://www.jetbrains.com/dottrace/)
 
 ### License
 
-* [GNU GPL v3](http://www.gnu.org/licenses/gpl.html)
+- [GNU GPL v3](http://www.gnu.org/licenses/gpl.html)
-* Copyright 2010-2021
+- Copyright 2010-2022
 
-Icon Credit:
+Icon Credit - [Box vector created by freepik - www.freepik.com](https://www.freepik.com/vectors/box)
-<a href="https://www.freepik.com/vectors/box">Box vector created by freepik - www.freepik.com</a>

azure-pipelines.yml

@@ -7,14 +7,20 @@ variables:
   outputFolder: './_output'
   artifactsFolder: './_artifacts'
   testsFolder: './_tests'
-  majorVersion: '0.1.4'
+  yarnCacheFolder: $(Pipeline.Workspace)/.yarn
+  nugetCacheFolder: $(Pipeline.Workspace)/.nuget/packages
+  majorVersion: '1.3.1'
   minorVersion: $[counter('minorVersion', 1)]
   prowlarrVersion: '$(majorVersion).$(minorVersion)'
   buildName: '$(Build.SourceBranchName).$(prowlarrVersion)'
   sentryOrg: 'servarr'
   sentryUrl: 'https://sentry.servarr.com'
-  dotnetVersion: '6.0.100'
+  dotnetVersion: '6.0.405'
-  yarnCacheFolder: $(Pipeline.Workspace)/.yarn
+  innoVersion: '6.2.0'
+  nodeVersion: '16.x'
+  windowsImage: 'windows-2022'
+  linuxImage: 'ubuntu-20.04'
+  macImage: 'macOS-11'
 
 trigger:
   branches:
@@ -29,6 +35,7 @@ pr:
   paths:
     exclude:
     - src/NzbDrone.Core/Localization/Core
+    - src/Prowlarr.API.*/openapi.json
 
 stages:
   - stage: Setup
@@ -37,7 +44,7 @@ stages:
     - job:
       displayName: Build Variables
       pool:
-        vmImage: 'ubuntu-18.04'
+        vmImage: ${{ variables.linuxImage }}
       steps:
       # Set the build name properly.  The 'name' property won't recursively expand so hack here:
       - bash: echo "##vso[build.updatebuildnumber]$PROWLARRVERSION"
@@ -63,15 +70,15 @@ stages:
         matrix:
           Linux:
             osName: 'Linux'
-            imageName: 'ubuntu-18.04'
+            imageName: ${{ variables.linuxImage }}
             enableAnalysis: 'true'
           Mac:
             osName: 'Mac'
-            imageName: 'macos-10.15'
+            imageName: ${{ variables.macImage }}
             enableAnalysis: 'false'
           Windows:
             osName: 'Windows'
-            imageName: 'windows-2019'
+            imageName: ${{ variables.windowsImage }}
             enableAnalysis: 'false'
 
       pool:
@@ -90,15 +97,14 @@ stages:
       - bash: |
           BUNDLEDVERSIONS=${AGENT_TOOLSDIRECTORY}/dotnet/sdk/${DOTNETVERSION}/Microsoft.NETCoreSdk.BundledVersions.props
           echo $BUNDLEDVERSIONS
-          grep osx-x64 $BUNDLEDVERSIONS
           if grep -q freebsd-x64 $BUNDLEDVERSIONS; then
-            echo "BSD already enabled"
+            echo "Extra platforms already enabled"
           else
-            echo "Enabling BSD support"
+            echo "Enabling extra platform support"
-            sed -i.ORI 's/osx-x64/osx-x64;freebsd-x64/' $BUNDLEDVERSIONS
+            sed -i.ORI 's/osx-x64/osx-x64;freebsd-x64;linux-x86/' $BUNDLEDVERSIONS
           fi
-        displayName: Enable FreeBSD Support
+        displayName: Enable Extra Platform Support
-      - bash: ./build.sh --backend --enable-bsd
+      - bash: ./build.sh --backend --enable-extra-platforms
         displayName: Build Prowlarr Backend
       - bash: |
           find ${OUTPUTFOLDER} -type f ! -path "*/publish/*" -exec rm -rf {} \;
@@ -112,24 +118,28 @@ stages:
         displayName: Publish Backend
         condition: and(succeeded(), eq(variables['osName'], 'Windows'))
       - publish: '$(testsFolder)/net6.0/win-x64/publish'
-        artifact: WindowsCoreTests
+        artifact: win-x64-tests
-        displayName: Publish Windows Test Package
+        displayName: Publish win-x64 Test Package
         condition: and(succeeded(), eq(variables['osName'], 'Windows'))
       - publish: '$(testsFolder)/net6.0/linux-x64/publish'
-        artifact: LinuxCoreTests
+        artifact: linux-x64-tests
-        displayName: Publish Linux Test Package
+        displayName: Publish linux-x64 Test Package
+        condition: and(succeeded(), eq(variables['osName'], 'Windows'))
+      - publish: '$(testsFolder)/net6.0/linux-x86/publish'
+        artifact: linux-x86-tests
+        displayName: Publish linux-x86 Test Package
         condition: and(succeeded(), eq(variables['osName'], 'Windows'))
       - publish: '$(testsFolder)/net6.0/linux-musl-x64/publish'
-        artifact: LinuxMuslCoreTests
+        artifact: linux-musl-x64-tests
-        displayName: Publish Linux Musl Test Package
+        displayName: Publish linux-musl-x64 Test Package
         condition: and(succeeded(), eq(variables['osName'], 'Windows'))
       - publish: '$(testsFolder)/net6.0/freebsd-x64/publish'
-        artifact: FreebsdCoreTests
+        artifact: freebsd-x64-tests
-        displayName: Publish FreeBSD Test Package
+        displayName: Publish freebsd-x64 Test Package
         condition: and(succeeded(), eq(variables['osName'], 'Windows'))
       - publish: '$(testsFolder)/net6.0/osx-x64/publish'
-        artifact: MacCoreTests
+        artifact: osx-x64-tests
-        displayName: Publish MacOS Test Package
+        displayName: Publish osx-x64 Test Package
         condition: and(succeeded(), eq(variables['osName'], 'Windows'))
 
   - stage: Build_Frontend
@@ -141,20 +151,20 @@ stages:
         matrix:
           Linux:
             osName: 'Linux'
-            imageName: 'ubuntu-18.04'
+            imageName: ${{ variables.linuxImage }}
           Mac:
             osName: 'Mac'
-            imageName: 'macos-10.15'
+            imageName: ${{ variables.macImage }}
           Windows:
             osName: 'Windows'
-            imageName: 'windows-2019'
+            imageName: ${{ variables.windowsImage }}
       pool:
         vmImage: $(imageName)
       steps:
       - task: NodeTool@0
         displayName: Set Node.js version
         inputs:
-          versionSpec: '12.x'
+          versionSpec: $(nodeVersion)
       - checkout: self
         submodules: true
         fetchDepth: 1
@@ -163,7 +173,6 @@ stages:
           key: 'yarn | "$(osName)" | yarn.lock'
           restoreKeys: |
              yarn | "$(osName)"
-             yarn
           path: $(yarnCacheFolder)
         displayName: Cache Yarn packages
       - bash: ./build.sh --frontend
@@ -184,7 +193,7 @@ stages:
     - job: Windows_Installer
       displayName: Create Installer
       pool:
-        vmImage: 'windows-2019'
+        vmImage: ${{ variables.windowsImage }}
       steps:
       - checkout: self
         fetchDepth: 1
@@ -200,16 +209,11 @@ stages:
           artifactName: WindowsFrontend
           targetPath: _output
         displayName: Fetch Frontend
-      - bash: ./build.sh --packages
-        displayName: Create Packages
       - bash: |
-          distribution/windows/setup/inno/ISCC.exe distribution/windows/setup/prowlarr.iss //DFramework=net6.0 //DRuntime=win-x86
+          ./build.sh --packages --installer
-          cp distribution/windows/setup/output/Prowlarr.*windows.net6.0.exe ${BUILD_ARTIFACTSTAGINGDIRECTORY}/Prowlarr.${BUILDNAME}.windows-core-x86-installer.exe
+          cp distribution/windows/setup/output/Prowlarr.*win-x64.exe ${BUILD_ARTIFACTSTAGINGDIRECTORY}/Prowlarr.${BUILDNAME}.windows-core-x64-installer.exe
-        displayName: Create x86 .NET Core Windows installer
+          cp distribution/windows/setup/output/Prowlarr.*win-x86.exe ${BUILD_ARTIFACTSTAGINGDIRECTORY}/Prowlarr.${BUILDNAME}.windows-core-x86-installer.exe
-      - bash: |
+        displayName: Create Installers
-          distribution/windows/setup/inno/ISCC.exe distribution/windows/setup/prowlarr.iss //DFramework=net6.0 //DRuntime=win-x64
-          cp distribution/windows/setup/output/Prowlarr.*windows.net6.0.exe ${BUILD_ARTIFACTSTAGINGDIRECTORY}/Prowlarr.${BUILDNAME}.windows-core-x64-installer.exe
-        displayName: Create x64 .NET Core Windows installer
       - publish: $(Build.ArtifactStagingDirectory)
         artifact: 'WindowsInstaller'
         displayName: Publish Installer
@@ -222,7 +226,7 @@ stages:
     - job: Other_Packages
       displayName: Create Standard Packages
       pool:
-        vmImage: 'ubuntu-18.04'
+        vmImage: ${{ variables.linuxImage }}
       steps:
       - checkout: self
         fetchDepth: 1
@@ -238,35 +242,35 @@ stages:
           artifactName: WindowsFrontend
           targetPath: _output
         displayName: Fetch Frontend
-      - bash: ./build.sh --packages --enable-bsd
+      - bash: ./build.sh --packages --enable-extra-platforms
         displayName: Create Packages
       - bash: |
           find . -name "Prowlarr" -exec chmod a+x {} \;
           find . -name "Prowlarr.Update" -exec chmod a+x {} \;
         displayName: Set executable bits
       - task: ArchiveFiles@2
-        displayName: Create Windows Core zip
+        displayName: Create win-x64 zip
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).windows-core-x64.zip'
           archiveType: 'zip'
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/win-x64/net6.0
       - task: ArchiveFiles@2
-        displayName: Create Windows x86 Core zip
+        displayName: Create win-x86 zip
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).windows-core-x86.zip'
           archiveType: 'zip'
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/win-x86/net6.0
       - task: ArchiveFiles@2
-        displayName: Create MacOS x64 Core app
+        displayName: Create osx-x64 app
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).osx-app-core-x64.zip'
           archiveType: 'zip'
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/osx-x64-app/net6.0
       - task: ArchiveFiles@2
-        displayName: Create MacOS x64 Core tar
+        displayName: Create osx-x64 tar
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).osx-core-x64.tar.gz'
           archiveType: 'tar'
@@ -274,14 +278,14 @@ stages:
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/osx-x64/net6.0
       - task: ArchiveFiles@2
-        displayName: Create MacOS arm64 Core app
+        displayName: Create osx-arm64 app
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).osx-app-core-arm64.zip'
           archiveType: 'zip'
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/osx-arm64-app/net6.0
       - task: ArchiveFiles@2
-        displayName: Create MacOS arm64 Core tar
+        displayName: Create osx-arm64 tar
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).osx-core-arm64.tar.gz'
           archiveType: 'tar'
@@ -289,7 +293,7 @@ stages:
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/osx-arm64/net6.0
       - task: ArchiveFiles@2
-        displayName: Create Linux Core tar
+        displayName: Create linux-x64 tar
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).linux-core-x64.tar.gz'
           archiveType: 'tar'
@@ -297,7 +301,7 @@ stages:
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/linux-x64/net6.0
       - task: ArchiveFiles@2
-        displayName: Create Linux Musl Core tar
+        displayName: Create linux-musl-x64 tar
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).linux-musl-core-x64.tar.gz'
           archiveType: 'tar'
@@ -305,7 +309,15 @@ stages:
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/linux-musl-x64/net6.0
       - task: ArchiveFiles@2
-        displayName: Create ARM32 Linux Core tar
+        displayName: Create linux-x86 tar
+        inputs:
+          archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).linux-core-x86.tar.gz'
+          archiveType: 'tar'
+          tarCompression: 'gz'
+          includeRootFolder: false
+          rootFolderOrFile: $(artifactsFolder)/linux-x86/net6.0
+      - task: ArchiveFiles@2
+        displayName: Create linux-arm tar
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).linux-core-arm.tar.gz'
           archiveType: 'tar'
@@ -313,7 +325,7 @@ stages:
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/linux-arm/net6.0
       - task: ArchiveFiles@2
-        displayName: Create ARM32 Linux Musl Core tar
+        displayName: Create linux-musl-arm tar
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).linux-musl-core-arm.tar.gz'
           archiveType: 'tar'
@@ -321,7 +333,7 @@ stages:
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/linux-musl-arm/net6.0
       - task: ArchiveFiles@2
-        displayName: Create ARM64 Linux Core tar
+        displayName: Create linux-arm64 tar
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).linux-core-arm64.tar.gz'
           archiveType: 'tar'
@@ -329,7 +341,7 @@ stages:
           includeRootFolder: false
           rootFolderOrFile: $(artifactsFolder)/linux-arm64/net6.0
       - task: ArchiveFiles@2
-        displayName: Create ARM64 Linux Musl Core tar
+        displayName: Create linux-musl-arm64 tar
         inputs:
           archiveFile: '$(Build.ArtifactStagingDirectory)/Prowlarr.$(buildName).linux-musl-core-arm64.tar.gz'
           archiveType: 'tar'
@@ -382,7 +394,7 @@ stages:
     jobs:
     - job: Prepare
       pool:
-        vmImage: 'ubuntu-18.04'
+        vmImage: ${{ variables.linuxImage }}
       steps:
       - checkout: none
       - task: DownloadPipelineArtifact@2
@@ -404,22 +416,22 @@ stages:
         matrix:
           MacCore:
             osName: 'Mac'
-            testName: 'MacCore'
+            testName: 'osx-x64'
             poolName: 'Azure Pipelines'
-            imageName: 'macos-10.15'
+            imageName: ${{ variables.macImage }}
           WindowsCore:
             osName: 'Windows'
-            testName: 'WindowsCore'
+            testName: 'win-x64'
             poolName: 'Azure Pipelines'
-            imageName: 'windows-2019'
+            imageName: ${{ variables.windowsImage }}
           LinuxCore:
             osName: 'Linux'
-            testName: 'LinuxCore'
+            testName: 'linux-x64'
             poolName: 'Azure Pipelines'
-            imageName: 'ubuntu-18.04'
+            imageName: ${{ variables.linuxImage }}
           FreebsdCore:
             osName: 'Linux'
-            testName: 'FreebsdCore'
+            testName: 'freebsd-x64'
             poolName: 'FreeBSD'
             imageName:
 
@@ -438,7 +450,7 @@ stages:
         displayName: Download Test Artifact
         inputs:
           buildType: 'current'
-          artifactName: '$(testName)Tests'
+          artifactName: '$(testName)-tests'
           targetPath: $(testsFolder)
       - powershell: Set-Service SCardSvr -StartupType Manual
         displayName: Enable Windows Test Service
@@ -468,11 +480,15 @@ stages:
         matrix:
           alpine:
             testName: 'Musl Net Core'
-            artifactName: LinuxMuslCoreTests
+            artifactName: linux-musl-x64-tests
             containerImage: ghcr.io/servarr/testimages:alpine
+          linux-x86:
+            testName: 'linux-x86'
+            artifactName: linux-x86-tests
+            containerImage: ghcr.io/servarr/testimages:linux-x86
 
       pool:
-        vmImage: 'ubuntu-18.04'
+        vmImage: ${{ variables.linuxImage }}
       
       container: $[ variables['containerImage'] ]
 
@@ -480,9 +496,15 @@ stages:
         
       steps:
       - task: UseDotNet@2
-        displayName: 'Install .net core'
+        displayName: 'Install .NET'
         inputs:
           version: $(dotnetVersion)
+        condition: and(succeeded(), ne(variables['testName'], 'linux-x86'))
+      - bash: |
+          SDKURL=$(curl -s https://api.github.com/repos/Servarr/dotnet-linux-x86/releases | jq -rc '.[].assets[].browser_download_url' | grep sdk-${DOTNETVERSION}.*gz$)
+          curl -fsSL $SDKURL | tar xzf - -C /opt/dotnet
+        displayName: 'Install .NET'
+        condition: and(succeeded(), eq(variables['testName'], 'linux-x86'))
       - checkout: none
       - task: DownloadPipelineArtifact@2
         displayName: Download Test Artifact
@@ -505,6 +527,58 @@ stages:
           testResultsFiles: '**/TestResult.xml'
           testRunTitle: '$(testName) Unit Tests'
           failTaskOnFailedTests: true
+          
+    - job: Unit_LinuxCore_Postgres
+      displayName: Unit Native LinuxCore with Postgres Database
+      dependsOn: Prepare
+      condition: and(succeeded(), eq(dependencies.Prepare.outputs['setVar.backendNotUpdated'], '0'))
+      variables:
+        pattern: 'Prowlarr.*.linux-core-x64.tar.gz'
+        artifactName: linux-x64-tests
+        Prowlarr__Postgres__Host: 'localhost'
+        Prowlarr__Postgres__Port: '5432'
+        Prowlarr__Postgres__User: 'prowlarr'
+        Prowlarr__Postgres__Password: 'prowlarr'
+
+      pool:
+        vmImage: ${{ variables.linuxImage }}
+
+      timeoutInMinutes: 10
+        
+      steps:
+      - task: UseDotNet@2
+        displayName: 'Install .net core'
+        inputs:
+          version: $(dotnetVersion)
+      - checkout: none
+      - task: DownloadPipelineArtifact@2
+        displayName: Download Test Artifact
+        inputs:
+          buildType: 'current'
+          artifactName: $(artifactName)
+          targetPath: $(testsFolder)
+      - bash: find ${TESTSFOLDER} -name "Prowlarr.Test.Dummy" -exec chmod a+x {} \;
+        displayName: Make Test Dummy Executable
+        condition: and(succeeded(), ne(variables['osName'], 'Windows'))
+      - bash: |
+          docker run -d --name=postgres14 \
+          -e POSTGRES_PASSWORD=prowlarr \
+          -e POSTGRES_USER=prowlarr \
+          -p 5432:5432/tcp \
+          postgres:14
+        displayName: Start postgres
+      - bash: |
+          chmod a+x ${TESTSFOLDER}/test.sh
+          ls -lR ${TESTSFOLDER}
+          ${TESTSFOLDER}/test.sh Linux Unit Test
+        displayName: Run Tests
+      - task: PublishTestResults@2
+        displayName: Publish Test Results
+        inputs:
+          testResultsFormat: 'NUnit'
+          testResultsFiles: '**/TestResult.xml'
+          testRunTitle: 'LinuxCore Postgres Unit Tests'
+          failTaskOnFailedTests: true
 
   - stage: Integration
     displayName: Integration
@@ -513,7 +587,7 @@ stages:
     jobs:
     - job: Prepare
       pool:
-        vmImage: 'ubuntu-18.04'
+        vmImage: ${{ variables.linuxImage }}
       steps:
       - checkout: none
       - task: DownloadPipelineArtifact@2
@@ -532,18 +606,18 @@ stages:
         matrix:
           MacCore:
             osName: 'Mac'
-            testName: 'MacCore'
+            testName: 'osx-x64'
-            imageName: 'macos-10.15'
+            imageName: ${{ variables.macImage }}
             pattern: 'Prowlarr.*.osx-core-x64.tar.gz'
           WindowsCore:
             osName: 'Windows'
-            testName: 'WindowsCore'
+            testName: 'win-x64'
-            imageName: 'windows-2019'
+            imageName: ${{ variables.windowsImage }}
             pattern: 'Prowlarr.*.windows-core-x64.zip'
           LinuxCore:
             osName: 'Linux'
-            testName: 'LinuxCore'
+            testName: 'linux-x64'
-            imageName: 'ubuntu-18.04'
+            imageName: ${{ variables.linuxImage }}
             pattern: 'Prowlarr.*.linux-core-x64.tar.gz'
 
       pool:
@@ -559,7 +633,7 @@ stages:
         displayName: Download Test Artifact
         inputs:
           buildType: 'current'
-          artifactName: '$(testName)Tests'
+          artifactName: '$(testName)-tests'
           targetPath: $(testsFolder)
       - task: DownloadPipelineArtifact@2
         displayName: Download Build Artifact
@@ -589,6 +663,67 @@ stages:
           failTaskOnFailedTests: true
         displayName: Publish Test Results
 
+    - job: Integration_LinuxCore_Postgres
+      displayName: Integration Native LinuxCore with Postgres Database
+      dependsOn: Prepare
+      condition: and(succeeded(), eq(dependencies.Prepare.outputs['setVar.backendNotUpdated'], '0'))
+      variables:
+        pattern: 'Prowlarr.*.linux-core-x64.tar.gz'
+        Prowlarr__Postgres__Host: 'localhost'
+        Prowlarr__Postgres__Port: '5432'
+        Prowlarr__Postgres__User: 'prowlarr'
+        Prowlarr__Postgres__Password: 'prowlarr'
+
+      pool:
+        vmImage: ${{ variables.linuxImage }}
+
+      steps:
+        - task: UseDotNet@2
+          displayName: 'Install .net core'
+          inputs:
+            version: $(dotnetVersion)
+        - checkout: none
+        - task: DownloadPipelineArtifact@2
+          displayName: Download Test Artifact
+          inputs:
+            buildType: 'current'
+            artifactName: 'linux-x64-tests'
+            targetPath: $(testsFolder)
+        - task: DownloadPipelineArtifact@2
+          displayName: Download Build Artifact
+          inputs:
+            buildType: 'current'
+            artifactName: Packages
+            itemPattern: '**/$(pattern)'
+            targetPath: $(Build.ArtifactStagingDirectory)
+        - task: ExtractFiles@1
+          inputs:
+            archiveFilePatterns: '$(Build.ArtifactStagingDirectory)/**/$(pattern)' 
+            destinationFolder: '$(Build.ArtifactStagingDirectory)/bin'
+          displayName: Extract Package
+        - bash: |
+            mkdir -p ./bin/
+            cp -r -v ${BUILD_ARTIFACTSTAGINGDIRECTORY}/bin/Prowlarr/. ./bin/
+          displayName: Move Package Contents
+        - bash: |
+            docker run -d --name=postgres14 \
+            -e POSTGRES_PASSWORD=prowlarr \
+            -e POSTGRES_USER=prowlarr \
+            -p 5432:5432/tcp \
+            postgres:14
+          displayName: Start postgres
+        - bash: |
+            chmod a+x ${TESTSFOLDER}/test.sh
+            ${TESTSFOLDER}/test.sh Linux Integration Test
+          displayName: Run Integration Tests
+        - task: PublishTestResults@2
+          inputs:
+            testResultsFormat: 'NUnit'
+            testResultsFiles: '**/TestResult.xml'
+            testRunTitle: 'Integration LinuxCore Postgres Database Integration Tests'
+            failTaskOnFailedTests: true
+          displayName: Publish Test Results
+
     - job: Integration_FreeBSD
       displayName: Integration Native FreeBSD
       dependsOn: Prepare
@@ -606,14 +741,14 @@ stages:
         displayName: Download Test Artifact
         inputs:
           buildType: 'current'
-          artifactName: 'FreebsdCoreTests'
+          artifactName: 'freebsd-x64-tests'
           targetPath: $(testsFolder)
       - task: DownloadPipelineArtifact@2
         displayName: Download Build Artifact
         inputs:
           buildType: 'current'
           artifactName: Packages
-          itemPattern: '/$(pattern)'
+          itemPattern: '**/$(pattern)'
           targetPath: $(Build.ArtifactStagingDirectory)
       - bash: |
           mkdir -p ${BUILD_ARTIFACTSTAGINGDIRECTORY}/bin
@@ -642,13 +777,17 @@ stages:
       strategy:
         matrix:
           alpine:
-            testName: 'Musl Net Core'
+            testName: 'linux-musl-x64'
-            artifactName: LinuxMuslCoreTests
+            artifactName: linux-musl-x64-tests
             containerImage: ghcr.io/servarr/testimages:alpine
             pattern: 'Prowlarr.*.linux-musl-core-x64.tar.gz'
-
+          linux-x86:
+            testName: 'linux-x86'
+            artifactName: linux-x86-tests
+            containerImage: ghcr.io/servarr/testimages:linux-x86
+            pattern: 'Prowlarr.*.linux-core-x86.tar.gz'
       pool:
-        vmImage: 'ubuntu-18.04'
+        vmImage: ${{ variables.linuxImage }}
 
       container: $[ variables['containerImage'] ]
 
@@ -656,9 +795,15 @@ stages:
         
       steps:
       - task: UseDotNet@2
-        displayName: 'Install .net core'
+        displayName: 'Install .NET'
         inputs:
           version: $(dotnetVersion)
+        condition: and(succeeded(), ne(variables['testName'], 'linux-x86'))
+      - bash: |
+          SDKURL=$(curl -s https://api.github.com/repos/Servarr/dotnet-linux-x86/releases | jq -rc '.[].assets[].browser_download_url' | grep sdk-${DOTNETVERSION}.*gz$)
+          curl -fsSL $SDKURL | tar xzf - -C /opt/dotnet
+        displayName: 'Install .NET'
+        condition: and(succeeded(), eq(variables['testName'], 'linux-x86'))
       - checkout: none
       - task: DownloadPipelineArtifact@2
         displayName: Download Test Artifact
@@ -704,19 +849,22 @@ stages:
         matrix:
           Linux:
             osName: 'Linux'
-            imageName: 'ubuntu-18.04'
+            artifactName: 'linux-x64'
+            imageName: ${{ variables.linuxImage }}
             pattern: 'Prowlarr.*.linux-core-x64.tar.gz'
-            failBuild: false
+            failBuild: true
           Mac:
             osName: 'Mac'
-            imageName: 'macos-10.15'
+            artifactName: 'osx-x64'
+            imageName: ${{ variables.macImage }}
             pattern: 'Prowlarr.*.osx-core-x64.tar.gz'
-            failBuild: false
+            failBuild: true
           Windows:
             osName: 'Windows'
-            imageName: 'windows-2019'
+            artifactName: 'win-x64'
+            imageName: ${{ variables.windowsImage }}
             pattern: 'Prowlarr.*.windows-core-x64.zip'
-            failBuild: false
+            failBuild: true
 
       pool:
         vmImage: $(imageName)
@@ -731,7 +879,7 @@ stages:
         displayName: Download Test Artifact
         inputs:
           buildType: 'current'
-          artifactName: '$(osName)CoreTests'
+          artifactName: '$(artifactName)-tests'
           targetPath: $(testsFolder)
       - task: DownloadPipelineArtifact@2
         displayName: Download Build Artifact
@@ -780,7 +928,7 @@ stages:
     jobs:
     - job: Prepare
       pool:
-        vmImage: 'ubuntu-18.04'
+        vmImage: ${{ variables.linuxImage }}
       steps:
       - checkout: none
       - task: DownloadPipelineArtifact@2
@@ -797,17 +945,17 @@ stages:
         matrix:
           Linux:
             osName: 'Linux'
-            imageName: 'ubuntu-18.04'
+            imageName: ${{ variables.linuxImage }}
           Windows:
             osName: 'Windows'
-            imageName: 'windows-2019'
+            imageName: ${{ variables.windowsImage }}
       pool:
         vmImage: $(imageName)
       steps:
       - task: NodeTool@0
         displayName: Set Node.js version
         inputs:
-          versionSpec: '12.x'
+          versionSpec: $(nodeVersion)
       - checkout: self
         submodules: true
         fetchDepth: 1
@@ -816,7 +964,6 @@ stages:
           key: 'yarn | "$(osName)" | yarn.lock'
           restoreKeys: |
              yarn | "$(osName)"
-             yarn
           path: $(yarnCacheFolder)
         displayName: Cache Yarn packages
       - bash: ./build.sh --lint
@@ -825,6 +972,59 @@ stages:
           FORCE_COLOR: 0
           YARN_CACHE_FOLDER: $(yarnCacheFolder)
 
+    - job: Api_Docs
+      displayName: API Docs
+      dependsOn: Prepare
+      condition: |
+        and
+        (
+          and(succeeded(), eq(variables['Build.SourceBranch'], 'refs/heads/develop')),
+          and(succeeded(), eq(dependencies.Prepare.outputs['setVar.backendNotUpdated'], '0'))
+        )
+
+      pool:
+        vmImage: ${{ variables.windowsImage }}
+
+      steps:
+      - task: UseDotNet@2
+        displayName: 'Install .net core'
+        inputs:
+          version: $(dotnetVersion)
+      - checkout: self
+        submodules: true
+        persistCredentials: true
+        fetchDepth: 1    
+      - bash: ./docs.sh Windows
+        displayName: Create openapi.json
+      - bash: |
+          git config --global user.email "development@lidarr.audio"
+          git config --global user.name "Servarr"
+          git checkout -b api-docs
+          git add .
+          if git status | grep -q modified
+          then
+            git commit -am 'Automated API Docs update'
+            git push -f --set-upstream origin api-docs
+            curl -X POST -H "Authorization: token ${GITHUBTOKEN}" -H "Accept: application/vnd.github.v3+json" https://api.github.com/repos/prowlarr/prowlarr/pulls -d '{"head":"api-docs","base":"develop","title":"Update API docs"}'
+          else
+            echo "No changes since last run"
+          fi
+        displayName: Commit API Doc Change
+        continueOnError: true
+        env:
+          GITHUBTOKEN: $(githubToken)
+      - task: CopyFiles@2
+        displayName: 'Copy openapi.json to: $(Build.ArtifactStagingDirectory)'
+        inputs:
+          SourceFolder: '$(Build.SourcesDirectory)'
+          Contents: |
+            **/*openapi.json
+          TargetFolder: '$(Build.ArtifactStagingDirectory)/api_docs'
+      - publish: $(Build.ArtifactStagingDirectory)/api_docs
+        artifact: 'APIDocs'
+        displayName: Publish API Docs Bundle
+        condition: and(succeeded(), eq(variables['System.JobAttempt'], '1'))
+
     - job: Analyze_Backend
       displayName: Backend
       dependsOn: Prepare
@@ -835,7 +1035,7 @@ stages:
         EnableAnalyzers: 'false'
 
       pool:
-        vmImage: windows-2019
+        vmImage: ${{ variables.windowsImage }}
 
       steps:
       - task: UseDotNet@2
@@ -892,7 +1092,7 @@ stages:
     - job:
       displayName: Discord Notification
       pool:
-        vmImage: 'windows-2019'
+        vmImage: ${{ variables.linuxImage }}
       steps:
         - task: DownloadPipelineArtifact@2
           continueOnError: true
@@ -908,4 +1108,5 @@ stages:
             SYSTEM_ACCESSTOKEN: $(System.AccessToken)
             DISCORDCHANNELID: $(discordChannelId)
             DISCORDWEBHOOKKEY: $(discordWebhookKey)
+            DISCORDTHREADID: $(discordThreadId)
 

build.sh

@@ -25,15 +25,22 @@ UpdateVersionNumber()
     fi
 }
 
-EnableBsdSupport()
+EnableExtraPlatformsInSDK()
 {
-    #todo enable sdk with
+    SDK_PATH=$(dotnet --list-sdks | grep -P '6\.\d\.\d+' | head -1 | sed 's/\(6\.[0-9]*\.[0-9]*\).*\[\(.*\)\]/\2\/\1/g')
-    #SDK_PATH=$(dotnet --list-sdks | grep -P '5\.\d\.\d+' | head -1 | sed 's/\(5\.[0-9]*\.[0-9]*\).*\[\(.*\)\]/\2\/\1/g')
+    BUNDLEDVERSIONS="${SDK_PATH}/Microsoft.NETCoreSdk.BundledVersions.props"
-    # BUNDLED_VERSIONS="${SDK_PATH}/Microsoft.NETCoreSdk.BundledVersions.props"
+    if grep -q freebsd-x64 $BUNDLEDVERSIONS; then
+        echo "Extra platforms already enabled"
+    else
+        echo "Enabling extra platform support"
+        sed -i.ORI 's/osx-x64/osx-x64;freebsd-x64;linux-x86/' $BUNDLEDVERSIONS
+    fi
+}
 
+EnableExtraPlatforms()
+{
     if grep -qv freebsd-x64 src/Directory.Build.props; then
-        sed -i'' -e "s^<RuntimeIdentifiers>\(.*\)</RuntimeIdentifiers>^<RuntimeIdentifiers>\1;freebsd-x64</RuntimeIdentifiers>^g" src/Directory.Build.props
+        sed -i'' -e "s^<RuntimeIdentifiers>\(.*\)</RuntimeIdentifiers>^<RuntimeIdentifiers>\1;freebsd-x64;linux-x86</RuntimeIdentifiers>^g" src/Directory.Build.props
-        sed -i'' -e "s^<ExcludedRuntimeFrameworkPairs>\(.*\)</ExcludedRuntimeFrameworkPairs>^<ExcludedRuntimeFrameworkPairs>\1;freebsd-x64:net472</ExcludedRuntimeFrameworkPairs>^g" src/Directory.Build.props
     fi
 }
 
@@ -234,6 +241,32 @@ Package()
     esac
 }
 
+BuildInstaller()
+{
+    local framework="$1"
+    local runtime="$2"
+    
+    ./_inno/ISCC.exe distribution/windows/setup/prowlarr.iss "//DFramework=$framework" "//DRuntime=$runtime"
+}
+
+InstallInno()
+{
+    ProgressStart "Installing portable Inno Setup"
+    
+    rm -rf _inno
+    curl -s --output innosetup.exe "https://files.jrsoftware.org/is/6/innosetup-${INNOVERSION:-6.2.0}.exe"
+    mkdir _inno
+    ./innosetup.exe //portable=1 //silent //currentuser //dir=.\\_inno
+    rm innosetup.exe
+    
+    ProgressEnd "Installed portable Inno Setup"
+}
+
+RemoveInno()
+{
+    rm -rf _inno
+}
+
 PackageTests()
 {
     local framework="$1"
@@ -265,8 +298,10 @@ if [ $# -eq 0 ]; then
     BACKEND=YES
     FRONTEND=YES
     PACKAGES=YES
+    INSTALLER=NO
     LINT=YES
-    ENABLE_BSD=NO
+    ENABLE_EXTRA_PLATFORMS=NO
+    ENABLE_EXTRA_PLATFORMS_IN_SDK=NO
 fi
 
 while [[ $# -gt 0 ]]
@@ -278,8 +313,12 @@ case $key in
         BACKEND=YES
         shift # past argument
         ;;
-    --enable-bsd)
+    --enable-bsd|--enable-extra-platforms)
-        ENABLE_BSD=YES
+        ENABLE_EXTRA_PLATFORMS=YES
+        shift # past argument
+        ;;
+    --enable-extra-platforms-in-sdk)
+        ENABLE_EXTRA_PLATFORMS_IN_SDK=YES
         shift # past argument
         ;;
     -r|--runtime)
@@ -300,6 +339,10 @@ case $key in
         PACKAGES=YES
         shift # past argument
         ;;
+    --installer)
+        INSTALLER=YES
+        shift # past argument
+        ;;
     --lint)
         LINT=YES
         shift # past argument
@@ -319,12 +362,17 @@ esac
 done
 set -- "${POSITIONAL[@]}" # restore positional parameters
 
+if [ "$ENABLE_EXTRA_PLATFORMS_IN_SDK" = "YES" ];
+then
+    EnableExtraPlatformsInSDK
+fi
+
 if [ "$BACKEND" = "YES" ];
 then
     UpdateVersionNumber
-    if [ "$ENABLE_BSD" = "YES" ];
+    if [ "$ENABLE_EXTRA_PLATFORMS" = "YES" ];
     then
-        EnableBsdSupport
+        EnableExtraPlatforms
     fi
     Build
     if [[ -z "$RID" || -z "$FRAMEWORK" ]];
@@ -334,9 +382,10 @@ then
         PackageTests "net6.0" "linux-x64"
         PackageTests "net6.0" "linux-musl-x64"
         PackageTests "net6.0" "osx-x64"
-        if [ "$ENABLE_BSD" = "YES" ];
+        if [ "$ENABLE_EXTRA_PLATFORMS" = "YES" ];
         then
             PackageTests "net6.0" "freebsd-x64"
+            PackageTests "net6.0" "linux-x86"
         fi
     else
         PackageTests "$FRAMEWORK" "$RID"
@@ -375,11 +424,20 @@ then
         Package "net6.0" "linux-musl-arm"
         Package "net6.0" "osx-x64"
         Package "net6.0" "osx-arm64"
-        if [ "$ENABLE_BSD" = "YES" ];
+        if [ "$ENABLE_EXTRA_PLATFORMS" = "YES" ];
         then
             Package "net6.0" "freebsd-x64"
+            Package "net6.0" "linux-x86"
         fi
     else
         Package "$FRAMEWORK" "$RID"
     fi
 fi
+
+if [ "$INSTALLER" = "YES" ];
+then
+    InstallInno
+    BuildInstaller "net6.0" "win-x64"
+    BuildInstaller "net6.0" "win-x86"
+    RemoveInno
+fi

distribution/osx/Prowlarr.app/Contents/Info.plist

@@ -15,7 +15,7 @@
 	<key>CFBundleIconFile</key>
 	<string>prowlarr.icns</string>
 	<key>CFBundleIdentifier</key>
-	<string>com.osx.prowlarr.video</string>
+	<string>com.osx.prowlarr.com</string>
 	<key>CFBundleInfoDictionaryVersion</key>
 	<string>6.0</string>
 	<key>CFBundleName</key>

distribution/windows/setup/build.bat

@@ -1,3 +0,0 @@
-#SET BUILD_NUMBER=1
-#SET branch=develop
-inno\ISCC.exe prowlarr.iss

distribution/windows/setup/inno/Default.isl

@@ -1,336 +0,0 @@
-; *** Inno Setup version 5.5.3+ English messages ***
-;
-; To download user-contributed translations of this file, go to:
-;   http://www.jrsoftware.org/files/istrans/
-;
-; Note: When translating this text, do not add periods (.) to the end of
-; messages that didn't have them already, because on those messages Inno
-; Setup adds the periods automatically (appending a period would result in
-; two periods being displayed).
-
-[LangOptions]
-; The following three entries are very important. Be sure to read and 
-; understand the '[LangOptions] section' topic in the help file.
-LanguageName=English
-LanguageID=$0409
-LanguageCodePage=0
-; If the language you are translating to requires special font faces or
-; sizes, uncomment any of the following entries and change them accordingly.
-;DialogFontName=
-;DialogFontSize=8
-;WelcomeFontName=Verdana
-;WelcomeFontSize=12
-;TitleFontName=Arial
-;TitleFontSize=29
-;CopyrightFontName=Arial
-;CopyrightFontSize=8
-
-[Messages]
-
-; *** Application titles
-SetupAppTitle=Setup
-SetupWindowTitle=Setup - %1
-UninstallAppTitle=Uninstall
-UninstallAppFullTitle=%1 Uninstall
-
-; *** Misc. common
-InformationTitle=Information
-ConfirmTitle=Confirm
-ErrorTitle=Error
-
-; *** SetupLdr messages
-SetupLdrStartupMessage=This will install %1. Do you wish to continue?
-LdrCannotCreateTemp=Unable to create a temporary file. Setup aborted
-LdrCannotExecTemp=Unable to execute file in the temporary directory. Setup aborted
-
-; *** Startup error messages
-LastErrorMessage=%1.%n%nError %2: %3
-SetupFileMissing=The file %1 is missing from the installation directory. Please correct the problem or obtain a new copy of the program.
-SetupFileCorrupt=The setup files are corrupted. Please obtain a new copy of the program.
-SetupFileCorruptOrWrongVer=The setup files are corrupted, or are incompatible with this version of Setup. Please correct the problem or obtain a new copy of the program.
-InvalidParameter=An invalid parameter was passed on the command line:%n%n%1
-SetupAlreadyRunning=Setup is already running.
-WindowsVersionNotSupported=This program does not support the version of Windows your computer is running.
-WindowsServicePackRequired=This program requires %1 Service Pack %2 or later.
-NotOnThisPlatform=This program will not run on %1.
-OnlyOnThisPlatform=This program must be run on %1.
-OnlyOnTheseArchitectures=This program can only be installed on versions of Windows designed for the following processor architectures:%n%n%1
-MissingWOW64APIs=The version of Windows you are running does not include functionality required by Setup to perform a 64-bit installation. To correct this problem, please install Service Pack %1.
-WinVersionTooLowError=This program requires %1 version %2 or later.
-WinVersionTooHighError=This program cannot be installed on %1 version %2 or later.
-AdminPrivilegesRequired=You must be logged in as an administrator when installing this program.
-PowerUserPrivilegesRequired=You must be logged in as an administrator or as a member of the Power Users group when installing this program.
-SetupAppRunningError=Setup has detected that %1 is currently running.%n%nPlease close all instances of it now, then click OK to continue, or Cancel to exit.
-UninstallAppRunningError=Uninstall has detected that %1 is currently running.%n%nPlease close all instances of it now, then click OK to continue, or Cancel to exit.
-
-; *** Misc. errors
-ErrorCreatingDir=Setup was unable to create the directory "%1"
-ErrorTooManyFilesInDir=Unable to create a file in the directory "%1" because it contains too many files
-
-; *** Setup common messages
-ExitSetupTitle=Exit Setup
-ExitSetupMessage=Setup is not complete. If you exit now, the program will not be installed.%n%nYou may run Setup again at another time to complete the installation.%n%nExit Setup?
-AboutSetupMenuItem=&About Setup...
-AboutSetupTitle=About Setup
-AboutSetupMessage=%1 version %2%n%3%n%n%1 home page:%n%4
-AboutSetupNote=
-TranslatorNote=
-
-; *** Buttons
-ButtonBack=< &Back
-ButtonNext=&Next >
-ButtonInstall=&Install
-ButtonOK=OK
-ButtonCancel=Cancel
-ButtonYes=&Yes
-ButtonYesToAll=Yes to &All
-ButtonNo=&No
-ButtonNoToAll=N&o to All
-ButtonFinish=&Finish
-ButtonBrowse=&Browse...
-ButtonWizardBrowse=B&rowse...
-ButtonNewFolder=&Make New Folder
-
-; *** "Select Language" dialog messages
-SelectLanguageTitle=Select Setup Language
-SelectLanguageLabel=Select the language to use during the installation:
-
-; *** Common wizard text
-ClickNext=Click Next to continue, or Cancel to exit Setup.
-BeveledLabel=
-BrowseDialogTitle=Browse For Folder
-BrowseDialogLabel=Select a folder in the list below, then click OK.
-NewFolderName=New Folder
-
-; *** "Welcome" wizard page
-WelcomeLabel1=Welcome to the [name] Setup Wizard
-WelcomeLabel2=This will install [name/ver] on your computer.%n%nIt is recommended that you close all other applications before continuing.
-
-; *** "Password" wizard page
-WizardPassword=Password
-PasswordLabel1=This installation is password protected.
-PasswordLabel3=Please provide the password, then click Next to continue. Passwords are case-sensitive.
-PasswordEditLabel=&Password:
-IncorrectPassword=The password you entered is not correct. Please try again.
-
-; *** "License Agreement" wizard page
-WizardLicense=License Agreement
-LicenseLabel=Please read the following important information before continuing.
-LicenseLabel3=Please read the following License Agreement. You must accept the terms of this agreement before continuing with the installation.
-LicenseAccepted=I &accept the agreement
-LicenseNotAccepted=I &do not accept the agreement
-
-; *** "Information" wizard pages
-WizardInfoBefore=Information
-InfoBeforeLabel=Please read the following important information before continuing.
-InfoBeforeClickLabel=When you are ready to continue with Setup, click Next.
-WizardInfoAfter=Information
-InfoAfterLabel=Please read the following important information before continuing.
-InfoAfterClickLabel=When you are ready to continue with Setup, click Next.
-
-; *** "User Information" wizard page
-WizardUserInfo=User Information
-UserInfoDesc=Please enter your information.
-UserInfoName=&User Name:
-UserInfoOrg=&Organization:
-UserInfoSerial=&Serial Number:
-UserInfoNameRequired=You must enter a name.
-
-; *** "Select Destination Location" wizard page
-WizardSelectDir=Select Destination Location
-SelectDirDesc=Where should [name] be installed?
-SelectDirLabel3=Setup will install [name] into the following folder.
-SelectDirBrowseLabel=To continue, click Next. If you would like to select a different folder, click Browse.
-DiskSpaceMBLabel=At least [mb] MB of free disk space is required.
-CannotInstallToNetworkDrive=Setup cannot install to a network drive.
-CannotInstallToUNCPath=Setup cannot install to a UNC path.
-InvalidPath=You must enter a full path with drive letter; for example:%n%nC:\APP%n%nor a UNC path in the form:%n%n\\server\share
-InvalidDrive=The drive or UNC share you selected does not exist or is not accessible. Please select another.
-DiskSpaceWarningTitle=Not Enough Disk Space
-DiskSpaceWarning=Setup requires at least %1 KB of free space to install, but the selected drive only has %2 KB available.%n%nDo you want to continue anyway?
-DirNameTooLong=The folder name or path is too long.
-InvalidDirName=The folder name is not valid.
-BadDirName32=Folder names cannot include any of the following characters:%n%n%1
-DirExistsTitle=Folder Exists
-DirExists=The folder:%n%n%1%n%nalready exists. Would you like to install to that folder anyway?
-DirDoesntExistTitle=Folder Does Not Exist
-DirDoesntExist=The folder:%n%n%1%n%ndoes not exist. Would you like the folder to be created?
-
-; *** "Select Components" wizard page
-WizardSelectComponents=Select Components
-SelectComponentsDesc=Which components should be installed?
-SelectComponentsLabel2=Select the components you want to install; clear the components you do not want to install. Click Next when you are ready to continue.
-FullInstallation=Full installation
-; if possible don't translate 'Compact' as 'Minimal' (I mean 'Minimal' in your language)
-CompactInstallation=Compact installation
-CustomInstallation=Custom installation
-NoUninstallWarningTitle=Components Exist
-NoUninstallWarning=Setup has detected that the following components are already installed on your computer:%n%n%1%n%nDeselecting these components will not uninstall them.%n%nWould you like to continue anyway?
-ComponentSize1=%1 KB
-ComponentSize2=%1 MB
-ComponentsDiskSpaceMBLabel=Current selection requires at least [mb] MB of disk space.
-
-; *** "Select Additional Tasks" wizard page
-WizardSelectTasks=Select Additional Tasks
-SelectTasksDesc=Which additional tasks should be performed?
-SelectTasksLabel2=Select the additional tasks you would like Setup to perform while installing [name], then click Next.
-
-; *** "Select Start Menu Folder" wizard page
-WizardSelectProgramGroup=Select Start Menu Folder
-SelectStartMenuFolderDesc=Where should Setup place the program's shortcuts?
-SelectStartMenuFolderLabel3=Setup will create the program's shortcuts in the following Start Menu folder.
-SelectStartMenuFolderBrowseLabel=To continue, click Next. If you would like to select a different folder, click Browse.
-MustEnterGroupName=You must enter a folder name.
-GroupNameTooLong=The folder name or path is too long.
-InvalidGroupName=The folder name is not valid.
-BadGroupName=The folder name cannot include any of the following characters:%n%n%1
-NoProgramGroupCheck2=&Don't create a Start Menu folder
-
-; *** "Ready to Install" wizard page
-WizardReady=Ready to Install
-ReadyLabel1=Setup is now ready to begin installing [name] on your computer.
-ReadyLabel2a=Click Install to continue with the installation, or click Back if you want to review or change any settings.
-ReadyLabel2b=Click Install to continue with the installation.
-ReadyMemoUserInfo=User information:
-ReadyMemoDir=Destination location:
-ReadyMemoType=Setup type:
-ReadyMemoComponents=Selected components:
-ReadyMemoGroup=Start Menu folder:
-ReadyMemoTasks=Additional tasks:
-
-; *** "Preparing to Install" wizard page
-WizardPreparing=Preparing to Install
-PreparingDesc=Setup is preparing to install [name] on your computer.
-PreviousInstallNotCompleted=The installation/removal of a previous program was not completed. You will need to restart your computer to complete that installation.%n%nAfter restarting your computer, run Setup again to complete the installation of [name].
-CannotContinue=Setup cannot continue. Please click Cancel to exit.
-ApplicationsFound=The following applications are using files that need to be updated by Setup. It is recommended that you allow Setup to automatically close these applications.
-ApplicationsFound2=The following applications are using files that need to be updated by Setup. It is recommended that you allow Setup to automatically close these applications. After the installation has completed, Setup will attempt to restart the applications.
-CloseApplications=&Automatically close the applications
-DontCloseApplications=&Do not close the applications
-ErrorCloseApplications=Setup was unable to automatically close all applications. It is recommended that you close all applications using files that need to be updated by Setup before continuing.
-
-; *** "Installing" wizard page
-WizardInstalling=Installing
-InstallingLabel=Please wait while Setup installs [name] on your computer.
-
-; *** "Setup Completed" wizard page
-FinishedHeadingLabel=Completing the [name] Setup Wizard
-FinishedLabelNoIcons=Setup has finished installing [name] on your computer.
-FinishedLabel=Setup has finished installing [name] on your computer. The application may be launched by selecting the installed icons.
-ClickFinish=Click Finish to exit Setup.
-FinishedRestartLabel=To complete the installation of [name], Setup must restart your computer. Would you like to restart now?
-FinishedRestartMessage=To complete the installation of [name], Setup must restart your computer.%n%nWould you like to restart now?
-ShowReadmeCheck=Yes, I would like to view the README file
-YesRadio=&Yes, restart the computer now
-NoRadio=&No, I will restart the computer later
-; used for example as 'Run MyProg.exe'
-RunEntryExec=Run %1
-; used for example as 'View Readme.txt'
-RunEntryShellExec=View %1
-
-; *** "Setup Needs the Next Disk" stuff
-ChangeDiskTitle=Setup Needs the Next Disk
-SelectDiskLabel2=Please insert Disk %1 and click OK.%n%nIf the files on this disk can be found in a folder other than the one displayed below, enter the correct path or click Browse.
-PathLabel=&Path:
-FileNotInDir2=The file "%1" could not be located in "%2". Please insert the correct disk or select another folder.
-SelectDirectoryLabel=Please specify the location of the next disk.
-
-; *** Installation phase messages
-SetupAborted=Setup was not completed.%n%nPlease correct the problem and run Setup again.
-EntryAbortRetryIgnore=Click Retry to try again, Ignore to proceed anyway, or Abort to cancel installation.
-
-; *** Installation status messages
-StatusClosingApplications=Closing applications...
-StatusCreateDirs=Creating directories...
-StatusExtractFiles=Extracting files...
-StatusCreateIcons=Creating shortcuts...
-StatusCreateIniEntries=Creating INI entries...
-StatusCreateRegistryEntries=Creating registry entries...
-StatusRegisterFiles=Registering files...
-StatusSavingUninstall=Saving uninstall information...
-StatusRunProgram=Finishing installation...
-StatusRestartingApplications=Restarting applications...
-StatusRollback=Rolling back changes...
-
-; *** Misc. errors
-ErrorInternal2=Internal error: %1
-ErrorFunctionFailedNoCode=%1 failed
-ErrorFunctionFailed=%1 failed; code %2
-ErrorFunctionFailedWithMessage=%1 failed; code %2.%n%3
-ErrorExecutingProgram=Unable to execute file:%n%1
-
-; *** Registry errors
-ErrorRegOpenKey=Error opening registry key:%n%1\%2
-ErrorRegCreateKey=Error creating registry key:%n%1\%2
-ErrorRegWriteKey=Error writing to registry key:%n%1\%2
-
-; *** INI errors
-ErrorIniEntry=Error creating INI entry in file "%1".
-
-; *** File copying errors
-FileAbortRetryIgnore=Click Retry to try again, Ignore to skip this file (not recommended), or Abort to cancel installation.
-FileAbortRetryIgnore2=Click Retry to try again, Ignore to proceed anyway (not recommended), or Abort to cancel installation.
-SourceIsCorrupted=The source file is corrupted
-SourceDoesntExist=The source file "%1" does not exist
-ExistingFileReadOnly=The existing file is marked as read-only.%n%nClick Retry to remove the read-only attribute and try again, Ignore to skip this file, or Abort to cancel installation.
-ErrorReadingExistingDest=An error occurred while trying to read the existing file:
-FileExists=The file already exists.%n%nWould you like Setup to overwrite it?
-ExistingFileNewer=The existing file is newer than the one Setup is trying to install. It is recommended that you keep the existing file.%n%nDo you want to keep the existing file?
-ErrorChangingAttr=An error occurred while trying to change the attributes of the existing file:
-ErrorCreatingTemp=An error occurred while trying to create a file in the destination directory:
-ErrorReadingSource=An error occurred while trying to read the source file:
-ErrorCopying=An error occurred while trying to copy a file:
-ErrorReplacingExistingFile=An error occurred while trying to replace the existing file:
-ErrorRestartReplace=RestartReplace failed:
-ErrorRenamingTemp=An error occurred while trying to rename a file in the destination directory:
-ErrorRegisterServer=Unable to register the DLL/OCX: %1
-ErrorRegSvr32Failed=RegSvr32 failed with exit code %1
-ErrorRegisterTypeLib=Unable to register the type library: %1
-
-; *** Post-installation errors
-ErrorOpeningReadme=An error occurred while trying to open the README file.
-ErrorRestartingComputer=Setup was unable to restart the computer. Please do this manually.
-
-; *** Uninstaller messages
-UninstallNotFound=File "%1" does not exist. Cannot uninstall.
-UninstallOpenError=File "%1" could not be opened. Cannot uninstall
-UninstallUnsupportedVer=The uninstall log file "%1" is in a format not recognized by this version of the uninstaller. Cannot uninstall
-UninstallUnknownEntry=An unknown entry (%1) was encountered in the uninstall log
-ConfirmUninstall=Are you sure you want to completely remove %1 and all of its components?
-UninstallOnlyOnWin64=This installation can only be uninstalled on 64-bit Windows.
-OnlyAdminCanUninstall=This installation can only be uninstalled by a user with administrative privileges.
-UninstallStatusLabel=Please wait while %1 is removed from your computer.
-UninstalledAll=%1 was successfully removed from your computer.
-UninstalledMost=%1 uninstall complete.%n%nSome elements could not be removed. These can be removed manually.
-UninstalledAndNeedsRestart=To complete the uninstallation of %1, your computer must be restarted.%n%nWould you like to restart now?
-UninstallDataCorrupted="%1" file is corrupted. Cannot uninstall
-
-; *** Uninstallation phase messages
-ConfirmDeleteSharedFileTitle=Remove Shared File?
-ConfirmDeleteSharedFile2=The system indicates that the following shared file is no longer in use by any programs. Would you like for Uninstall to remove this shared file?%n%nIf any programs are still using this file and it is removed, those programs may not function properly. If you are unsure, choose No. Leaving the file on your system will not cause any harm.
-SharedFileNameLabel=File name:
-SharedFileLocationLabel=Location:
-WizardUninstalling=Uninstall Status
-StatusUninstalling=Uninstalling %1...
-
-; *** Shutdown block reasons
-ShutdownBlockReasonInstallingApp=Installing %1.
-ShutdownBlockReasonUninstallingApp=Uninstalling %1.
-
-; The custom messages below aren't used by Setup itself, but if you make
-; use of them in your scripts, you'll want to translate them.
-
-[CustomMessages]
-
-NameAndVersion=%1 version %2
-AdditionalIcons=Additional icons:
-CreateDesktopIcon=Create a &desktop icon
-CreateQuickLaunchIcon=Create a &Quick Launch icon
-ProgramOnTheWeb=%1 on the Web
-UninstallProgram=Uninstall %1
-LaunchProgram=Launch %1
-AssocFileExtension=&Associate %1 with the %2 file extension
-AssocingFileExtension=Associating %1 with the %2 file extension...
-AutoStartProgramGroupDescription=Startup:
-AutoStartProgram=Automatically start %1
-AddonHostProgramNotFound=%1 could not be located in the folder you selected.%n%nDo you want to continue anyway?

distribution/windows/setup/prowlarr.iss

@@ -3,13 +3,12 @@
 
 #define AppName "Prowlarr"
 #define AppPublisher "Team Prowlarr"
-#define AppURL "https://prowlarr.video/"
+#define AppURL "https://prowlarr.com/"
-#define ForumsURL "https://forums.prowlarr.video/"
+#define ForumsURL "https://prowlarr.com/discord/"
 #define AppExeName "Prowlarr.exe"
 #define BaseVersion GetEnv('MAJORVERSION')
 #define BuildNumber GetEnv('MINORVERSION')
 #define BuildVersion GetEnv('PROWLARRVERSION')
-#define BranchName GetEnv('BUILD_SOURCEBRANCHNAME')
 
 [Setup]
 ; NOTE: The value of AppId uniquely identifies this application.
@@ -22,15 +21,15 @@ AppPublisher={#AppPublisher}
 AppPublisherURL={#AppURL}
 AppSupportURL={#ForumsURL}
 AppUpdatesURL={#AppURL}
-DefaultDirName={commonappdata}\Prowlarr\bin
+DefaultDirName={commonappdata}\Prowlarr
 DisableDirPage=yes
 DefaultGroupName={#AppName}
 DisableProgramGroupPage=yes
-OutputBaseFilename=Prowlarr.{#BranchName}.{#BuildVersion}.windows.{#Framework}
+OutputBaseFilename=Prowlarr.{#BuildVersion}.{#Runtime}
 SolidCompression=yes
 AppCopyright=Creative Commons 3.0 License
 AllowUNCPath=False
-UninstallDisplayIcon={app}\Prowlarr.exe
+UninstallDisplayIcon={app}\bin\Prowlarr.exe
 DisableReadyPage=True
 CompressionThreads=2
 Compression=lzma2/normal
@@ -38,6 +37,7 @@ AppContact={#ForumsURL}
 VersionInfoVersion={#BaseVersion}.{#BuildNumber}
 SetupLogging=yes
 OutputDir=output
+WizardStyle=modern
 
 [Languages]
 Name: "english"; MessagesFile: "compiler:Default.isl"
@@ -48,28 +48,31 @@ Name: "windowsService"; Description: "Install Windows Service (Starts when the c
 Name: "startupShortcut"; Description: "Create shortcut in Startup folder (Starts when you log into Windows)"; GroupDescription: "Start automatically"; Flags: exclusive unchecked
 Name: "none"; Description: "Do not start automatically"; GroupDescription: "Start automatically"; Flags: exclusive unchecked
 
+[Dirs]
+Name: "{app}"; Permissions: users-modify
+
 [Files]
-Source: "..\..\..\_artifacts\{#Runtime}\{#Framework}\Prowlarr\Prowlarr.exe"; DestDir: "{app}"; Flags: ignoreversion
+Source: "..\..\..\_artifacts\{#Runtime}\{#Framework}\Prowlarr\Prowlarr.exe"; DestDir: "{app}\bin"; Flags: ignoreversion
-Source: "..\..\..\_artifacts\{#Runtime}\{#Framework}\Prowlarr\*"; Excludes: "Prowlarr.Update"; DestDir: "{app}"; Flags: ignoreversion recursesubdirs createallsubdirs
+Source: "..\..\..\_artifacts\{#Runtime}\{#Framework}\Prowlarr\*"; Excludes: "Prowlarr.Update"; DestDir: "{app}\bin"; Flags: ignoreversion recursesubdirs createallsubdirs
 ; NOTE: Don't use "Flags: ignoreversion" on any shared system files
 
 [Icons]
-Name: "{group}\{#AppName}"; Filename: "{app}\{#AppExeName}"; Parameters: "/icon"
+Name: "{group}\{#AppName}"; Filename: "{app}\bin\{#AppExeName}"; Parameters: "/icon"
-Name: "{commondesktop}\{#AppName}"; Filename: "{app}\{#AppExeName}"; Parameters: "/icon"; Tasks: desktopIcon
+Name: "{commondesktop}\{#AppName}"; Filename: "{app}\bin\{#AppExeName}"; Parameters: "/icon"; Tasks: desktopIcon
-Name: "{userstartup}\{#AppName}"; Filename: "{app}\Prowlarr.exe"; WorkingDir: "{app}"; Tasks: startupShortcut
+Name: "{userstartup}\{#AppName}"; Filename: "{app}\bin\Prowlarr.exe"; WorkingDir: "{app}\bin"; Tasks: startupShortcut
 
 [InstallDelete]
-Name: "{app}"; Type: filesandordirs
+Name: "{app}\bin"; Type: filesandordirs
 
 [Run]
-Filename: "{app}\Prowlarr.Console.exe"; StatusMsg: "Removing previous Windows Service"; Parameters: "/u /exitimmediately"; Flags: runhidden waituntilterminated;
+Filename: "{app}\bin\Prowlarr.Console.exe"; StatusMsg: "Removing previous Windows Service"; Parameters: "/u /exitimmediately"; Flags: runhidden waituntilterminated;
-Filename: "{app}\Prowlarr.Console.exe"; Description: "Enable Access from Other Devices"; StatusMsg: "Enabling Remote access"; Parameters: "/registerurl /exitimmediately"; Flags: postinstall runascurrentuser runhidden waituntilterminated; Tasks: startupShortcut none;
+Filename: "{app}\bin\Prowlarr.Console.exe"; Description: "Enable Access from Other Devices"; StatusMsg: "Enabling Remote access"; Parameters: "/registerurl /exitimmediately"; Flags: postinstall runascurrentuser runhidden waituntilterminated; Tasks: startupShortcut none;
-Filename: "{app}\Prowlarr.Console.exe"; StatusMsg: "Installing Windows Service"; Parameters: "/i /exitimmediately"; Flags: runhidden waituntilterminated; Tasks: windowsService
+Filename: "{app}\bin\Prowlarr.Console.exe"; StatusMsg: "Installing Windows Service"; Parameters: "/i /exitimmediately"; Flags: runhidden waituntilterminated; Tasks: windowsService
-Filename: "{app}\Prowlarr.exe"; Description: "Open Prowlarr Web UI"; Flags: postinstall skipifsilent nowait; Tasks: windowsService;
+Filename: "{app}\bin\Prowlarr.exe"; Description: "Open Prowlarr Web UI"; Flags: postinstall skipifsilent nowait; Tasks: windowsService;
-Filename: "{app}\Prowlarr.exe"; Description: "Start Prowlarr"; Flags: postinstall skipifsilent nowait; Tasks: startupShortcut none;
+Filename: "{app}\bin\Prowlarr.exe"; Description: "Start Prowlarr"; Flags: postinstall skipifsilent nowait; Tasks: startupShortcut none;
 
 [UninstallRun]
-Filename: "{app}\prowlarr.console.exe"; Parameters: "/u"; Flags: waituntilterminated skipifdoesntexist
+Filename: "{app}\bin\prowlarr.console.exe"; Parameters: "/u"; Flags: waituntilterminated skipifdoesntexist
 
 [Code]
 function PrepareToInstall(var NeedsRestart: Boolean): String;

docs.sh

@@ -0,0 +1,38 @@
+PLATFORM=$1
+
+if [ "$PLATFORM" = "Windows" ]; then
+  RUNTIME="win-x64"
+elif [ "$PLATFORM" = "Linux" ]; then
+  WHERE="linux-x64"
+elif [ "$PLATFORM" = "Mac" ]; then
+  WHERE="osx-x64"
+else
+  echo "Platform must be provided as first arguement: Windows, Linux or Mac"
+  exit 1
+fi
+
+outputFolder='_output'
+testPackageFolder='_tests'
+
+rm -rf $outputFolder
+rm -rf $testPackageFolder
+
+slnFile=src/Prowlarr.sln
+
+platform=Posix
+
+dotnet clean $slnFile -c Debug
+dotnet clean $slnFile -c Release
+
+dotnet msbuild -restore $slnFile -p:Configuration=Debug -p:Platform=$platform -p:RuntimeIdentifiers=$RUNTIME -t:PublishAllRids
+
+dotnet new tool-manifest
+dotnet tool install --version 6.3.0 Swashbuckle.AspNetCore.Cli
+
+dotnet tool run swagger tofile --output ./src/Prowlarr.Api.V1/openapi.json "$outputFolder/net6.0/$RUNTIME/prowlarr.console.dll" v1 &
+
+sleep 30
+
+kill %1
+
+exit 0

frontend/.eslintrc.js

@@ -39,6 +39,7 @@ module.exports = {
   plugins: [
     'filenames',
     'react',
+    'react-hooks',
     'simple-import-sort',
     'import'
   ],
@@ -308,7 +309,9 @@ module.exports = {
     'react/react-in-jsx-scope': 2,
     'react/self-closing-comp': 2,
     'react/sort-comp': 2,
-    'react/jsx-wrap-multilines': 2
+    'react/jsx-wrap-multilines': 2,
+    'react-hooks/rules-of-hooks': 'error',
+    'react-hooks/exhaustive-deps': 'error'
   },
   overrides: [
     {

frontend/build/webpack.config.js

@@ -142,8 +142,8 @@ module.exports = (env) => {
     module: {
       rules: [
         {
-          test: /\.js?$/,
+          test: /\.jsx?$/,
-          exclude: /(node_modules|JsLibraries)/,
+          exclude: /[\\/]node_modules[\\/](?!(@sentry\/browser|@sentry\/integrations|chart.js|filesize|normalize.css)[\\/])/,
           use: [
             {
               loader: 'babel-loader',

frontend/postcss.config.js

@@ -1,7 +1,6 @@
 const reload = require('require-nocache')(module);
 
 const cssVarsFiles = [
-  './src/Styles/Variables/colors',
   './src/Styles/Variables/dimensions',
   './src/Styles/Variables/fonts',
   './src/Styles/Variables/animations',
@@ -29,4 +28,4 @@ module.exports = {
     'postcss-color-function',
     'postcss-nested'
   ]
-};
+};

frontend/src/App/App.js

@@ -4,16 +4,19 @@ import React from 'react';
 import DocumentTitle from 'react-document-title';
 import { Provider } from 'react-redux';
 import PageConnector from 'Components/Page/PageConnector';
+import ApplyTheme from './ApplyTheme';
 import AppRoutes from './AppRoutes';
 
 function App({ store, history }) {
   return (
-    <DocumentTitle title="Prowlarr">
+    <DocumentTitle title={window.Prowlarr.instanceName}>
       <Provider store={store}>
         <ConnectedRouter history={history}>
-          <PageConnector>
+          <ApplyTheme>
-            <AppRoutes app={App} />
+            <PageConnector>
-          </PageConnector>
+              <AppRoutes app={App} />
+            </PageConnector>
+          </ApplyTheme>
         </ConnectedRouter>
       </Provider>
     </DocumentTitle>

frontend/src/App/AppUpdatedModalContent.js

@@ -77,7 +77,9 @@ function AppUpdatedModalContent(props) {
             <div>
               {
                 !update.changes &&
-                  <div className={styles.maintenance}>Maintenance release</div>
+                  <div className={styles.maintenance}>
+                    {translate('MaintenanceRelease')}
+                  </div>
               }
 
               {

frontend/src/App/ApplyTheme.js

@@ -0,0 +1,50 @@
+import PropTypes from 'prop-types';
+import React, { Fragment, useCallback, useEffect } from 'react';
+import { connect } from 'react-redux';
+import { createSelector } from 'reselect';
+import themes from 'Styles/Themes';
+
+function createMapStateToProps() {
+  return createSelector(
+    (state) => state.settings.ui.item.theme || window.Prowlarr.theme,
+    (
+      theme
+    ) => {
+      return {
+        theme
+      };
+    }
+  );
+}
+
+function ApplyTheme({ theme, children }) {
+  // Update the CSS Variables
+
+  const updateCSSVariables = useCallback(() => {
+    const arrayOfVariableKeys = Object.keys(themes[theme]);
+    const arrayOfVariableValues = Object.values(themes[theme]);
+
+    // Loop through each array key and set the CSS Variables
+    arrayOfVariableKeys.forEach((cssVariableKey, index) => {
+      // Based on our snippet from MDN
+      document.documentElement.style.setProperty(
+        `--${cssVariableKey}`,
+        arrayOfVariableValues[index]
+      );
+    });
+  }, [theme]);
+
+  // On Component Mount and Component Update
+  useEffect(() => {
+    updateCSSVariables(theme);
+  }, [updateCSSVariables, theme]);
+
+  return <Fragment>{children}</Fragment>;
+}
+
+ApplyTheme.propTypes = {
+  theme: PropTypes.string.isRequired,
+  children: PropTypes.object.isRequired
+};
+
+export default connect(createMapStateToProps)(ApplyTheme);

frontend/src/Components/Alert.css

@@ -7,25 +7,25 @@
 }
 
 .danger {
-  border-color: $alertDangerBorderColor;
+  border-color: var(--alertDangerBorderColor);
-  background-color: $alertDangerBackgroundColor;
+  background-color: var(--alertDangerBackgroundColor);
-  color: $alertDangerColor;
+  color: var(--alertDangerColor);
 }
 
 .info {
-  border-color: $alertInfoBorderColor;
+  border-color: var(--alertInfoBorderColor);
-  background-color: $alertInfoBackgroundColor;
+  background-color: var(--alertInfoBackgroundColor);
-  color: $alertInfoColor;
+  color: var(--alertInfoColor);
 }
 
 .success {
-  border-color: $alertSuccessBorderColor;
+  border-color: var(--alertSuccessBorderColor);
-  background-color: $alertSuccessBackgroundColor;
+  background-color: var(--alertSuccessBackgroundColor);
-  color: $alertSuccessColor;
+  color: var(--alertSuccessColor);
 }
 
 .warning {
-  border-color: $alertWarningBorderColor;
+  border-color: var(--alertWarningBorderColor);
-  background-color: $alertWarningBackgroundColor;
+  background-color: var(--alertWarningBackgroundColor);
-  color: $alertWarningColor;
+  color: var(--alertWarningColor);
 }

frontend/src/Components/Card.css

@@ -3,9 +3,9 @@
   margin: 10px;
   padding: 10px;
   border-radius: 3px;
-  background-color: $white;
+  background-color: var(--cardBackgroundColor);
-  box-shadow: 0 0 10px 1px $cardShadowColor;
+  box-shadow: 0 0 10px 1px var(--cardShadowColor);
-  color: $defaultColor;
+  color: var(--defaultColor);
 }
 
 .underlay {

frontend/src/Components/Chart/BarChart.js

@@ -2,15 +2,16 @@ import Chart from 'chart.js/auto';
 import PropTypes from 'prop-types';
 import React, { Component } from 'react';
 import { kinds } from 'Helpers/Props';
-import colors from 'Styles/Variables/colors';
 
 function getColors(kind) {
 
+  const style = getComputedStyle(document.body);
+
   if (kind === kinds.WARNING) {
-    return colors.failedColors.reverse();
+    return style.getPropertyValue('--failedColors').split(',');
   }
 
-  return colors.chartColors;
+  return style.getPropertyValue('--chartColors').split(',');
 }
 
 class BarChart extends Component {

frontend/src/Components/Chart/DoughnutChart.js

@@ -1,7 +1,12 @@
 import Chart from 'chart.js/auto';
 import PropTypes from 'prop-types';
 import React, { Component } from 'react';
-import colors from 'Styles/Variables/colors';
+
+function getColors(kind) {
+
+  const style = getComputedStyle(document.body);
+  return style.getPropertyValue('--chartColorsDiversified').split(',');
+}
 
 class DoughnutChart extends Component {
   constructor(props) {
@@ -29,7 +34,7 @@ class DoughnutChart extends Component {
         datasets: [{
           label: this.props.title,
           data: this.props.data.map((d) => d.value),
-          backgroundColor: colors.chartColors
+          backgroundColor: getColors()
         }]
       }
     });

frontend/src/Components/Chart/StackedBarChart.js

@@ -1,7 +1,12 @@
 import Chart from 'chart.js/auto';
 import PropTypes from 'prop-types';
 import React, { Component } from 'react';
-import colors from 'Styles/Variables/colors';
+
+function getColors(index) {
+
+  const style = getComputedStyle(document.body);
+  return style.getPropertyValue('--chartColorsDiversified').split(',')[index];
+}
 
 class StackedBarChart extends Component {
   constructor(props) {
@@ -41,7 +46,7 @@ class StackedBarChart extends Component {
           return {
             label: d.label,
             data: d.data,
-            backgroundColor: colors.chartColors[index]
+            backgroundColor: getColors(index)
           };
         })
       }
@@ -54,7 +59,7 @@ class StackedBarChart extends Component {
       return {
         label: d.label,
         data: d.data,
-        backgroundColor: colors.chartColors[index]
+        backgroundColor: getColors(index)
       };
     });
     this.myChart.update();

frontend/src/Components/FieldSet.css

@@ -13,7 +13,7 @@
   width: 100%;
   border: 0;
   border-bottom: 1px solid #e5e5e5;
-  color: #3a3f51;
+  color: var(--textColor);
   font-size: 21px;
   line-height: inherit;
 }

frontend/src/Components/FileBrowser/FileBrowserModalContent.css

@@ -13,7 +13,7 @@
 }
 
 .faqLink {
-  color: $alertWarningColor;
+  color: var(--alertWarningColor);
   font-weight: bold;
 }
 

frontend/src/Components/Filter/Builder/DateFilterBuilderRowValue.js

@@ -160,6 +160,7 @@ class DateFilterBuilderRowValue extends Component {
       <TextInput
         name={NAME}
         value={filterValue}
+        type="date"
         placeholder="yyyy-mm-dd"
         onChange={this.onValueChange}
       />

frontend/src/Components/Filter/Builder/FilterBuilderModalContent.js

@@ -166,7 +166,9 @@ class FilterBuilderModalContent extends Component {
             </div>
           </div>
 
-          <div className={styles.label}>Filters</div>
+          <div className={styles.label}>
+            {translate('Filters')}
+          </div>
 
           <div className={styles.rows}>
             {

frontend/src/Components/Filter/Builder/FilterBuilderRow.css

@@ -3,7 +3,7 @@
   margin-bottom: 5px;
 
   &:hover {
-    background-color: $tableRowHoverBackgroundColor;
+    background-color: var(--tableRowHoverBackgroundColor);
   }
 }
 

frontend/src/Components/Filter/Builder/FilterBuilderRow.js

@@ -8,6 +8,7 @@ import BoolFilterBuilderRowValue from './BoolFilterBuilderRowValue';
 import DateFilterBuilderRowValue from './DateFilterBuilderRowValue';
 import FilterBuilderRowValueConnector from './FilterBuilderRowValueConnector';
 import IndexerFilterBuilderRowValueConnector from './IndexerFilterBuilderRowValueConnector';
+import PrivacyFilterBuilderRowValue from './PrivacyFilterBuilderRowValue';
 import ProtocolFilterBuilderRowValue from './ProtocolFilterBuilderRowValue';
 import TagFilterBuilderRowValueConnector from './TagFilterBuilderRowValueConnector';
 import styles from './FilterBuilderRow.css';
@@ -63,6 +64,9 @@ function getRowValueConnector(selectedFilterBuilderProp) {
     case filterBuilderValueTypes.PROTOCOL:
       return ProtocolFilterBuilderRowValue;
 
+    case filterBuilderValueTypes.PRIVACY:
+      return PrivacyFilterBuilderRowValue;
+
     case filterBuilderValueTypes.TAG:
       return TagFilterBuilderRowValueConnector;
 

frontend/src/Components/Filter/Builder/FilterBuilderRowValueTag.css

@@ -17,5 +17,5 @@
 
 .or {
   margin: 0 3px;
-  color: $themeDarkColor;
+  color: var(--themeDarkColor);
 }

frontend/src/Components/Filter/Builder/PrivacyFilterBuilderRowValue.js

@@ -0,0 +1,20 @@
+import React from 'react';
+import translate from 'Utilities/String/translate';
+import FilterBuilderRowValue from './FilterBuilderRowValue';
+
+const privacyTypes = [
+  { id: 'public', name: translate('Public') },
+  { id: 'private', name: translate('Private') },
+  { id: 'semiPrivate', name: translate('SemiPrivate') }
+];
+
+function PrivacyFilterBuilderRowValue(props) {
+  return (
+    <FilterBuilderRowValue
+      tagList={privacyTypes}
+      {...props}
+    />
+  );
+}
+
+export default PrivacyFilterBuilderRowValue;

frontend/src/Components/Filter/CustomFilters/CustomFilter.css

@@ -4,7 +4,7 @@
   padding: 5px;
 
   &:hover {
-    background-color: $tableRowHoverBackgroundColor;
+    background-color: var(--tableRowHoverBackgroundColor);
   }
 }
 

frontend/src/Components/Filter/CustomFilters/CustomFiltersModalContent.js

@@ -50,7 +50,7 @@ function CustomFiltersModalContent(props) {
 
         <div className={styles.addButtonContainer}>
           <Button onPress={onAddCustomFilter}>
-            Add Custom Filter
+            {translate('AddCustomFilter')}
           </Button>
         </div>
       </ModalBody>

frontend/src/Components/Form/AutoSuggestInput.css

@@ -27,10 +27,10 @@
     overflow-y: auto;
     max-height: 200px;
     width: 100%;
-    border: 1px solid $inputBorderColor;
+    border: 1px solid var(--inputBorderColor);
     border-radius: 4px;
-    background-color: $white;
+    background-color: var(--inputBackgroundColor);
-    box-shadow: inset 0 1px 1px $inputBoxShadowColor;
+    box-shadow: inset 0 1px 1px var(--inputBoxShadowColor);
   }
 }
 
@@ -46,5 +46,5 @@
 }
 
 .suggestionHighlighted {
-  background-color: $menuItemHoverBackgroundColor;
+  background-color: var(--menuItemHoverBackgroundColor);
 }

frontend/src/Components/Form/CheckInput.css

@@ -32,21 +32,21 @@
   height: 20px;
   border: 1px solid #ccc;
   border-radius: 2px;
-  background-color: $white;
+  background-color: var(--white);
-  color: $white;
+  color: var(--white);
   text-align: center;
   line-height: 20px;
 }
 
 .checkbox:focus + .input {
   outline: 0;
-  border-color: $inputFocusBorderColor;
+  border-color: var(--inputFocusBorderColor);
-  box-shadow: inset 0 1px 1px $inputBoxShadowColor, 0 0 8px $inputFocusBoxShadowColor;
+  box-shadow: inset 0 1px 1px var(--inputBoxShadowColor), 0 0 8px var(--inputFocusBoxShadowColor);
 }
 
 .dangerIsChecked {
-  border-color: $dangerColor;
+  border-color: var(--dangerColor);
-  background-color: $dangerColor;
+  background-color: var(--dangerColor);
 
   &.isDisabled {
     opacity: 0.7;
@@ -54,8 +54,8 @@
 }
 
 .primaryIsChecked {
-  border-color: $primaryColor;
+  border-color: var(--primaryColor);
-  background-color: $primaryColor;
+  background-color: var(--primaryColor);
 
   &.isDisabled {
     opacity: 0.7;
@@ -63,8 +63,8 @@
 }
 
 .successIsChecked {
-  border-color: $successColor;
+  border-color: var(--successColor);
-  background-color: $successColor;
+  background-color: var(--successColor);
 
   &.isDisabled {
     opacity: 0.7;
@@ -72,8 +72,8 @@
 }
 
 .warningIsChecked {
-  border-color: $warningColor;
+  border-color: var(--warningColor);
-  background-color: $warningColor;
+  background-color: var(--warningColor);
 
   &.isDisabled {
     opacity: 0.7;
@@ -82,15 +82,15 @@
 
 .isNotChecked {
   &.isDisabled {
-    border-color: $disabledCheckInputColor;
+    border-color: var(--disabledCheckInputColor);
-    background-color: $disabledCheckInputColor;
+    background-color: var(--disabledCheckInputColor);
     opacity: 0.7;
   }
 }
 
 .isIndeterminate {
-  border-color: $gray;
+  border-color: var(--gray);
-  background-color: $gray;
+  background-color: var(--gray);
 }
 
 .helpText {

frontend/src/Components/Form/EnhancedSelectInput.css

@@ -39,7 +39,7 @@
 .dropdownArrowContainerDisabled {
   composes: dropdownArrowContainer;
 
-  color: $disabledInputColor;
+  color: var(--disabledInputColor);
 }
 
 .optionsContainer {
@@ -50,9 +50,9 @@
 .options {
   composes: scroller from '~Components/Scroller/Scroller.css';
 
-  border: 1px solid $inputBorderColor;
+  border: 1px solid var(--inputBorderColor);
   border-radius: 4px;
-  background-color: $white;
+  background-color: var(--inputBackgroundColor);
 }
 
 .optionsModal {
@@ -76,9 +76,9 @@
 .optionsModalScroller {
   composes: scroller from '~Components/Scroller/Scroller.css';
 
-  border: 1px solid $inputBorderColor;
+  border: 1px solid var(--inputBorderColor);
   border-radius: 4px;
-  background-color: $white;
+  background-color: var(--inputBackgroundColor);
 }
 
 .loading {
@@ -90,7 +90,7 @@
   display: flex;
   justify-content: flex-end;
   height: 40px;
-  border-bottom: 1px solid $borderColor;
+  border-bottom: 1px solid var(--borderColor);
 }
 
 .mobileCloseButton {
@@ -100,6 +100,6 @@
   line-height: 40px;
 
   &:hover {
-    color: $modalCloseButtonHoverColor;
+    color: var(--modalCloseButtonHoverColor);
   }
 }

frontend/src/Components/Form/EnhancedSelectInputOption.css

@@ -7,7 +7,7 @@
   cursor: default;
 
   &:hover {
-    background-color: #f8f8f8;
+    background-color: var(--inputHoverBackgroundColor);
   }
 }
 
@@ -24,17 +24,17 @@
 }
 
 .isSelected {
-  background-color: #e2e2e2;
+  background-color: var(--inputSelectedBackgroundColor);
 
   &:hover {
-    background-color: #e2e2e2;
+    background-color: var(--inputSelectedBackgroundColor);
   }
 
   &.isMobile {
     background-color: inherit;
 
     .iconContainer {
-      color: $primaryColor;
+      color: var(--primaryColor);
     }
   }
 }
@@ -49,7 +49,7 @@
 
 .isMobile {
   height: 50px;
-  border-bottom: 1px solid $borderColor;
+  border-bottom: 1px solid var(--borderColor);
 
   &:last-child {
     border: none;

frontend/src/Components/Form/EnhancedSelectInputSelectedValue.css

@@ -3,5 +3,5 @@
 }
 
 .isDisabled {
-  color: $disabledInputColor;
+  color: var(--disabledInputColor);
 }

frontend/src/Components/Form/FormInputGroup.css

@@ -40,7 +40,7 @@
 }
 
 .pendingChangesIcon {
-  color: $warningColor;
+  color: var(--warningColor);
   font-size: 20px;
   line-height: 35px;
 }

frontend/src/Components/Form/FormInputGroup.js

@@ -16,6 +16,7 @@ import FormInputHelpText from './FormInputHelpText';
 import IndexerFlagsSelectInputConnector from './IndexerFlagsSelectInputConnector';
 import InfoInput from './InfoInput';
 import KeyValueListInput from './KeyValueListInput';
+import NewznabCategorySelectInputConnector from './NewznabCategorySelectInputConnector';
 import NumberInput from './NumberInput';
 import OAuthInputConnector from './OAuthInputConnector';
 import PasswordInput from './PasswordInput';
@@ -68,6 +69,9 @@ function getComponent(type) {
     case inputTypes.PATH:
       return PathInputConnector;
 
+    case inputTypes.CATEGORY_SELECT:
+      return NewznabCategorySelectInputConnector;
+
     case inputTypes.INDEXER_FLAGS_SELECT:
       return IndexerFlagsSelectInputConnector;
 

frontend/src/Components/Form/FormInputHelpText.css

@@ -1,14 +1,14 @@
 .helpText {
   margin-top: 5px;
-  color: $helpTextColor;
+  color: var(--helpTextColor);
   line-height: 20px;
 }
 
 .isError {
-  color: $dangerColor;
+  color: var(--dangerColor);
 
   .link {
-    color: $dangerColor;
+    color: var(--dangerColor);
 
     &:hover {
       color: #e01313;
@@ -17,10 +17,10 @@
 }
 
 .isWarning {
-  color: $warningColor;
+  color: var(--warningColor);
 
   .link {
-    color: $warningColor;
+    color: var(--warningColor);
 
     &:hover {
       color: #e36c00;

frontend/src/Components/Form/FormLabel.css

@@ -7,11 +7,11 @@
 }
 
 .hasError {
-  color: $dangerColor;
+  color: var(--dangerColor);
 }
 
 .isAdvanced {
-  color: $advancedFormLabelColor;
+  color: var(--advancedFormLabelColor);
 }
 
 @media only screen and (max-width: $breakpointLarge) {

frontend/src/Components/Form/HintedSelectInputOption.css

@@ -18,6 +18,6 @@
   @add-mixin truncate;
 
   margin-left: 15px;
-  color: $darkGray;
+  color: var(--darkGray);
   font-size: $smallFontSize;
 }

frontend/src/Components/Form/HintedSelectInputSelectedValue.css

@@ -18,7 +18,7 @@
 
   flex: 1 10 0;
   margin-left: 15px;
-  color: $gray;
+  color: var(--gray);
   text-align: right;
   font-size: $smallFontSize;
 }

frontend/src/Components/Form/Input.css

@@ -2,26 +2,27 @@
   padding: 6px 16px;
   width: 100%;
   height: 35px;
-  border: 1px solid $inputBorderColor;
+  border: 1px solid var(--inputBorderColor);
   border-radius: 4px;
-  background-color: $white;
+  background-color: var(--inputBackgroundColor);
-  box-shadow: inset 0 1px 1px $inputBoxShadowColor;
+  box-shadow: inset 0 1px 1px var(--inputBoxShadowColor);
+  color: var(--textColor);
 
   &:focus {
     outline: 0;
-    border-color: $inputFocusBorderColor;
+    border-color: var(--inputFocusBorderColor);
-    box-shadow: inset 0 1px 1px $inputBoxShadowColor, 0 0 8px $inputFocusBoxShadowColor;
+    box-shadow: inset 0 1px 1px var(--inputBoxShadowColor), 0 0 8px var(--inputFocusBoxShadowColor);
   }
 }
 
 .hasError {
-  border-color: $inputErrorBorderColor;
+  border-color: var(--inputErrorBorderColor);
-  box-shadow: inset 0 1px 1px $inputBoxShadowColor, 0 0 8px $inputErrorBoxShadowColor;
+  box-shadow: inset 0 1px 1px var(--inputBoxShadowColor), 0 0 8px var(--inputErrorBoxShadowColor);
 }
 
 .hasWarning {
-  border-color: $inputWarningBorderColor;
+  border-color: var(--inputWarningBorderColor);
-  box-shadow: inset 0 1px 1px $inputBoxShadowColor, 0 0 8px $inputWarningBoxShadowColor;
+  box-shadow: inset 0 1px 1px var(--inputBoxShadowColor), 0 0 8px var(--inputWarningBoxShadowColor);
 }
 
 .hasButton {

frontend/src/Components/Form/KeyValueListInput.css

@@ -7,8 +7,8 @@
 
   &.isFocused {
     outline: 0;
-    border-color: $inputFocusBorderColor;
+    border-color: var(--inputFocusBorderColor);
-    box-shadow: inset 0 1px 1px $inputBoxShadowColor, 0 0 8px $inputFocusBoxShadowColor;
+    box-shadow: inset 0 1px 1px var(--inputBoxShadowColor), 0 0 8px var(--inputFocusBoxShadowColor);
   }
 }
 

frontend/src/Components/Form/KeyValueListInputItem.css

@@ -1,7 +1,7 @@
 .itemContainer {
   display: flex;
   margin-bottom: 3px;
-  border-bottom: 1px solid $inputBorderColor;
+  border-bottom: 1px solid var(--inputBorderColor);
 
   &:last-child {
     margin-bottom: 0;

frontend/src/Components/Form/NewznabCategorySelectInputConnector.js

@@ -31,7 +31,7 @@ function createMapStateToProps() {
       });
 
       return {
-        value,
+        value: value || [],
         values
       };
     }

frontend/src/Components/Form/ProviderFieldFormGroup.js

@@ -68,6 +68,7 @@ function ProviderFieldFormGroup(props) {
     label,
     helpText,
     helpLink,
+    placeholder,
     value,
     type,
     advanced,
@@ -100,6 +101,7 @@ function ProviderFieldFormGroup(props) {
         label={label}
         helpText={helpText}
         helpLink={helpLink}
+        placeholder={placeholder}
         value={value}
         values={getSelectValues(selectOptions)}
         errors={errors}
@@ -125,6 +127,7 @@ ProviderFieldFormGroup.propTypes = {
   label: PropTypes.string,
   helpText: PropTypes.string,
   helpLink: PropTypes.string,
+  placeholder: PropTypes.string,
   value: PropTypes.any,
   type: PropTypes.string.isRequired,
   advanced: PropTypes.bool.isRequired,

frontend/src/Components/Form/TagInput.css

@@ -7,8 +7,8 @@
 
   &.isFocused {
     outline: 0;
-    border-color: $inputFocusBorderColor;
+    border-color: var(--inputFocusBorderColor);
-    box-shadow: inset 0 1px 1px $inputBoxShadowColor, 0 0 8px $inputFocusBoxShadowColor;
+    box-shadow: inset 0 1px 1px var(--inputBoxShadowColor), 0 0 8px var(--inputFocusBoxShadowColor);
   }
 }
 
@@ -20,4 +20,6 @@
   width: 0%;
   height: 31px;
   border: none;
+  background-color: var(--inputBackground);
+  color: var(--textColor);
 }

frontend/src/Components/Form/TagInputInput.js

@@ -36,7 +36,6 @@ class TagInputInput extends Component {
       <div
         ref={forwardedRef}
         className={className}
-        component="div"
         onMouseDown={this.onMouseDown}
       >
         {

frontend/src/Components/Form/TextArea.css

@@ -7,7 +7,7 @@
 }
 
 .readOnly {
-  background-color: #eee;
+  background-color: var(--inputReadOnlyBackgroundColor);
 }
 
 .hasError {

frontend/src/Components/Form/TextInput.css

@@ -3,7 +3,7 @@
 }
 
 .readOnly {
-  background-color: #eee;
+  background-color: var(--inputReadOnlyBackgroundColor);
 }
 
 .hasError {

frontend/src/Components/Icon.css

@@ -1,5 +1,5 @@
 .danger {
-  color: $dangerColor;
+  color: var(--dangerColor);
 }
 
 .default {
@@ -7,25 +7,21 @@
 }
 
 .disabled {
-  color: $disabledColor;
+  color: var(--disabledColor);
 }
 
 .info {
-  color: $infoColor;
+  color: var(--infoColor);
-}
-
-.pink {
-  color: $pink;
 }
 
 .success {
-  color: $successColor;
+  color: var(--successColor);
 }
 
 .warning {
-  color: $warningColor;
+  color: var(--warningColor);
 }
 
 .purple {
-  color: $purple;
+  color: var(--purple);
 }

frontend/src/Components/InfoLabel.css

@@ -1,7 +1,7 @@
 .label {
   display: inline-block;
   margin: 2px;
-  color: $white;
+  color: var(--white);
   /** text-align: center; **/
   white-space: nowrap;
   line-height: 1;
@@ -10,7 +10,7 @@
 
 .title {
   margin-bottom: 2px;
-  color: $helpTextColor;
+  color: var(--helpTextColor);
   font-size: 10px;
 }
 
@@ -36,5 +36,5 @@
 /** Outline **/
 
 .outline {
-  background-color: $white;
+  background-color: var(--cardBackgroundColor);
 }

frontend/src/Components/Label.css

@@ -3,7 +3,7 @@
   margin: 2px;
   border: 1px solid;
   border-radius: 2px;
-  color: $white;
+  color: var(--white);
   text-align: center;
   white-space: nowrap;
   line-height: 1;
@@ -13,86 +13,77 @@
 /** Kinds **/
 
 .danger {
-  border-color: $dangerColor;
+  border-color: var(--dangerColor);
-  background-color: $dangerColor;
+  background-color: var(--dangerColor);
 
   &.outline {
-    color: $dangerColor;
+    color: var(--dangerColor);
   }
 }
 
 .default {
-  border-color: $themeLightColor;
+  border-color: var(--themeLightColor);
-  background-color: $themeLightColor;
+  background-color: var(--themeLightColor);
 
   &.outline {
-    color: $themeLightColor;
+    color: var(--themeLightColor);
   }
 }
 
 .disabled {
-  border-color: $disabledColor;
+  border-color: var(--disabledColor);
-  background-color: $disabledColor;
+  background-color: var(--disabledColor);
 
   &.outline {
-    color: $disabledColor;
+    color: var(--disabledColor);
   }
 }
 
 .info {
-  border-color: $infoColor;
+  border-color: var(--infoColor);
-  background-color: $infoColor;
+  background-color: var(--infoColor);
 
   &.outline {
-    color: $infoColor;
+    color: var(--infoColor);
   }
 }
 
 .inverse {
-  border-color: $lightGray;
+  border-color: var(--inverseLabelColor);
-  background-color: $lightGray;
+  background-color: var(--inverseLabelColor);
-  color: $defaultColor;
+  color: var(--inverseLabelTextColor);
 
   &.outline {
-    background-color: $defaultColor !important;
+    background-color: var(--inverseLabelTextColor) !important;
-    color: $lightGray;
+    color: var(--inverseLabelColor);
   }
 }
 
 .primary {
-  border-color: $primaryColor;
+  border-color: var(--primaryColor);
-  background-color: $primaryColor;
+  background-color: var(--primaryColor);
 
   &.outline {
-    color: $primaryColor;
+    color: var(--primaryColor);
   }
 }
 
 .success {
-  border-color: $successColor;
+  border-color: var(--successColor);
-  background-color: $successColor;
+  background-color: var(--successColor);
   color: #eee;
 
   &.outline {
-    color: $successColor;
+    color: var(--successColor);
   }
 }
 
 .warning {
-  border-color: $warningColor;
+  border-color: var(--warningColor);
-  background-color: $warningColor;
+  background-color: var(--warningColor);
 
   &.outline {
-    color: $warningColor;
+    color: var(--warningColor);
-  }
-}
-
-.queue {
-  border-color: $queueColor;
-  background-color: $queueColor;
-
-  &.outline {
-    color: $queueColor;
   }
 }
 
@@ -117,5 +108,5 @@
 /** Outline **/
 
 .outline {
-  background-color: $white;
+  background-color: var(--cardBackgroundColor);
 }

frontend/src/Components/Link/Button.css

@@ -19,62 +19,62 @@
 }
 
 .danger {
-  border-color: $dangerBorderColor;
+  border-color: var(--dangerBorderColor);
-  background-color: $dangerBackgroundColor;
+  background-color: var(--dangerBackgroundColor);
-  color: $white;
+  color: var(--white);
 
   &:hover {
-    border-color: $dangerHoverBorderColor;
+    border-color: var(--dangerHoverBorderColor);
-    background-color: $dangerHoverBackgroundColor;
+    background-color: var(--dangerHoverBackgroundColor);
-    color: $white;
+    color: var(--white);
   }
 }
 
 .default {
-  border-color: $defaultBorderColor;
+  border-color: var(--defaultBorderColor);
-  background-color: $defaultBackgroundColor;
+  background-color: var(--defaultButtonBackgroundColor);
-  color: $defaultColor;
+  color: var(--defaultButtonTextColor);
 
   &:hover {
-    border-color: $defaultHoverBorderColor;
+    border-color: var(--defaultHoverBorderColor);
-    background-color: $defaultHoverBackgroundColor;
+    background-color: var(--defaultHoverBackgroundColor);
-    color: $defaultColor;
+    color: var(--defaultButtonTextColor);
   }
 }
 
 .primary {
-  border-color: $primaryBorderColor;
+  border-color: var(--primaryBorderColor);
-  background-color: $primaryBackgroundColor;
+  background-color: var(--primaryBackgroundColor);
-  color: $white;
+  color: var(--white);
 
   &:hover {
-    border-color: $primaryHoverBorderColor;
+    border-color: var(--primaryHoverBorderColor);
-    background-color: $primaryHoverBackgroundColor;
+    background-color: var(--primaryHoverBackgroundColor);
-    color: $white;
+    color: var(--white);
   }
 }
 
 .success {
-  border-color: $successBorderColor;
+  border-color: var(--successBorderColor);
-  background-color: $successBackgroundColor;
+  background-color: var(--successBackgroundColor);
-  color: $white;
+  color: var(--white);
 
   &:hover {
-    border-color: $successHoverBorderColor;
+    border-color: var(--successHoverBorderColor);
-    background-color: $successHoverBackgroundColor;
+    background-color: var(--successHoverBackgroundColor);
-    color: $white;
+    color: var(--white);
   }
 }
 
 .warning {
-  border-color: $warningBorderColor;
+  border-color: var(--warningBorderColor);
-  background-color: $warningBackgroundColor;
+  background-color: var(--warningBackgroundColor);
-  color: $white;
+  color: var(--white);
 
   &:hover {
-    border-color: $warningHoverBorderColor;
+    border-color: var(--warningHoverBorderColor);
-    background-color: $warningHoverBackgroundColor;
+    background-color: var(--warningHoverBackgroundColor);
-    color: $white;
+    color: var(--white);
   }
 }
 

frontend/src/Components/Link/IconButton.css

@@ -12,10 +12,10 @@
   &:hover {
     border: none;
     background-color: inherit;
-    color: $iconButtonHoverColor;
+    color: var(--iconButtonHoverColor);
   }
 
   &.isDisabled {
-    color: $iconButtonDisabledColor;
+    color: var(--iconButtonDisabledColor);
   }
 }

frontend/src/Components/Link/Link.css

@@ -15,10 +15,10 @@
 }
 
 .to {
-  color: $linkColor;
+  color: var(--linkColor);
 
   &:hover {
-    color: $linkHoverColor;
+    color: var(--linkHoverColor);
     text-decoration: underline;
   }
 }

frontend/src/Components/Link/Link.js

@@ -47,10 +47,6 @@ class Link extends Component {
         el = 'a';
         linkProps.href = to;
         linkProps.target = target || '_self';
-      } else if (to.startsWith(`${window.Prowlarr.urlBase}/`)) {
-        el = RouterLink;
-        linkProps.to = to;
-        linkProps.target = target;
       } else {
         el = RouterLink;
         linkProps.to = `${window.Prowlarr.urlBase}/${to.replace(/^\//, '')}`;

frontend/src/Components/Loading/LoadingIndicator.css

@@ -26,7 +26,7 @@
 
 .ripple {
   position: absolute;
-  border: 2px solid #3a3f51;
+  border: 2px solid var(--themeDarkColor);
   border-radius: 100%;
   animation: rippleContainer 1.25s 0s infinite cubic-bezier(0.21, 0.53, 0.56, 0.8);
   animation-fill-mode: both;

frontend/src/Components/Menu/MenuButton.css

@@ -10,12 +10,12 @@
   }
 
   &:hover {
-    color: $toobarButtonHoverColor;
+    color: var(--toobarButtonHoverColor);
   }
 }
 
 .isDisabled {
-  color: $disabledColor;
+  color: var(--disabledColor);
 
   pointer-events: none;
 }

frontend/src/Components/Menu/MenuContent.css

@@ -2,7 +2,7 @@
   z-index: $popperZIndex;
   display: flex;
   flex-direction: column;
-  background-color: $toolbarMenuItemBackgroundColor;
+  background-color: var(--toolbarMenuItemBackgroundColor);
   line-height: 20px;
 }
 

frontend/src/Components/Menu/MenuItem.css

@@ -5,19 +5,19 @@
   padding: 10px 20px;
   min-width: 150px;
   max-width: 250px;
-  background-color: $toolbarMenuItemBackgroundColor;
+  background-color: var(--toolbarMenuItemBackgroundColor);
-  color: $menuItemColor;
+  color: var(--menuItemColor);
   line-height: 20px;
 
   &:hover,
   &:focus {
-    background-color: $toolbarMenuItemHoverBackgroundColor;
+    background-color: var(--toolbarMenuItemHoverBackgroundColor);
-    color: $menuItemHoverColor;
+    color: var(--menuItemHoverColor);
     text-decoration: none;
   }
 }
 
 .isDisabled {
-  color: $disabledColor;
+  color: var(--disabledColor);
   pointer-events: none;
 }

frontend/src/Components/Menu/MenuItemSeparator.css

@@ -2,5 +2,5 @@
   overflow: hidden;
   min-height: 1px;
   height: 1px;
-  background-color: $themeDarkColor;
+  background-color: var(--themeDarkColor);
 }

frontend/src/Components/Modal/ConfirmModal.js

@@ -30,10 +30,10 @@ function ConfirmModal(props) {
   useEffect(() => {
     if (isOpen) {
       bindShortcut('enter', onConfirm);
-    } else {
+
-      unbindShortcut('enter', onConfirm);
+      return () => unbindShortcut('enter', onConfirm);
     }
-  }, [onConfirm]);
+  }, [bindShortcut, unbindShortcut, isOpen, onConfirm]);
 
   return (
     <Modal

frontend/src/Components/Modal/Modal.css

@@ -12,7 +12,7 @@
   justify-content: center;
   width: 100%;
   height: 100%;
-  background-color: $modalBackdropBackgroundColor;
+  background-color: var(--modalBackdropBackgroundColor);
   opacity: 1;
 }
 

frontend/src/Components/Modal/ModalContent.css

@@ -4,7 +4,7 @@
   flex-direction: column;
   flex-grow: 1;
   width: 100%;
-  background-color: $modalBackgroundColor;
+  background-color: var(--modalBackgroundColor);
 }
 
 .closeButton {
@@ -18,6 +18,6 @@
   line-height: 60px;
 
   &:hover {
-    color: $modalCloseButtonHoverColor;
+    color: var(--modalCloseButtonHoverColor);
   }
 }

frontend/src/Components/Modal/ModalError.js

@@ -37,7 +37,8 @@ function ModalError(props) {
           {translate('Close')}
         </Button>
       </ModalFooter>
-    </ModalContent>);
+    </ModalContent>
+  );
 }
 
 ModalError.propTypes = {

frontend/src/Components/Modal/ModalFooter.css

@@ -4,7 +4,7 @@
   justify-content: flex-end;
   flex-shrink: 0;
   padding: 15px 30px;
-  border-top: 1px solid $borderColor;
+  border-top: 1px solid var(--borderColor);
 
   a,
   button {

frontend/src/Components/Modal/ModalHeader.css

@@ -3,6 +3,6 @@
 
   flex-shrink: 0;
   padding: 15px 50px 15px 30px;
-  border-bottom: 1px solid $borderColor;
+  border-bottom: 1px solid var(--borderColor);
   font-size: 18px;
 }

frontend/src/Components/Page/Header/IndexerSearchInput.css

@@ -12,22 +12,22 @@
 .ripple {
   composes: ripple from '~Components/Loading/LoadingIndicator.css';
 
-  border: 1px solid $toolbarColor;
+  border: 1px solid var(--toolbarColor);
 }
 
 .input {
   margin-left: 8px;
   width: 200px;
   border: none;
-  border-bottom: solid 1px $white;
+  border-bottom: solid 1px var(--white);
   border-radius: 0;
   background-color: transparent;
   box-shadow: none;
-  color: $white;
+  color: var(--white);
   transition: border 0.3s ease-out;
 
   &::placeholder {
-    color: $white;
+    color: var(--white);
     transition: color 0.3s ease-out;
   }
 
@@ -60,13 +60,13 @@
     overflow-y: auto;
     min-width: 100%;
     max-height: 230px;
-    border: 1px solid $themeDarkColor;
+    border: 1px solid var(--themeDarkColor);
     border-radius: 4px;
     border-top-left-radius: 0;
     border-top-right-radius: 0;
-    background-color: $themeDarkColor;
+    background-color: var(--themeDarkColor);
-    box-shadow: inset 0 1px 1px $inputBoxShadowColor;
+    box-shadow: inset 0 1px 1px var(--inputBoxShadowColor);
-    color: $menuItemColor;
+    color: var(--menuItemColor);
   }
 }
 
@@ -82,12 +82,12 @@
 }
 
 .highlighted {
-  background-color: $themeLightColor;
+  background-color: var(--themeLightColor);
 }
 
 .sectionTitle {
   padding: 5px 8px;
-  color: $disabledColor;
+  color: var(--disabledColor);
 }
 
 .addNewMovieSuggestion {

frontend/src/Components/Page/Header/IndexerSearchResult.css

@@ -21,7 +21,7 @@
 .alternateTitle {
   composes: title;
 
-  color: $disabledColor;
+  color: var(--disabledColor);
   font-size: $smallFontSize;
 }
 

frontend/src/Components/Page/Header/KeyboardShortcutsModalContent.css

@@ -8,8 +8,8 @@
 .key {
   padding: 2px 4px;
   border-radius: 3px;
-  background-color: $defaultColor;
+  background-color: var(--defaultColor);
   box-shadow: inset 0 -1px 0 rgba(0, 0, 0, 0.25);
-  color: $white;
+  color: var(--white);
   font-size: 16px;
 }

frontend/src/Components/Page/Header/PageHeader.css

@@ -4,9 +4,9 @@
   align-items: center;
   flex: 0 0 auto;
   height: $headerHeight;
-  background-color: $prowlarrOrange;
+  background-color: var(--pageHeaderBackgroundColor);
   box-shadow: 0 4px 8px 0 rgba(0, 0, 0, 0.2), 0 6px 20px 0 rgba(0, 0, 0, 0.19);
-  color: $white;
+  color: var(--white);
 }
 
 .logoContainer {
@@ -80,7 +80,7 @@
   align-items: center;
   justify-content: center;
   width: 30px;
-  color: $themeRed;
+  color: var(--themeRed);
   text-align: center;
   line-height: 60px;
 

frontend/src/Components/Page/Header/PageHeader.js

@@ -74,7 +74,7 @@ class PageHeader extends Component {
           <IconButton
             className={styles.donate}
             name={icons.HEART}
-            to="https://opencollective.com/prowlarr"
+            to="https://prowlarr.com/donate"
             size={14}
           />
           <IconButton

frontend/src/Components/Page/Header/PageHeaderActionsMenu.css

@@ -5,7 +5,7 @@
   text-align: center;
 
   &:hover {
-    color: $toobarButtonHoverColor;
+    color: #515253;
   }
 }
 

frontend/src/Components/Page/LoadingPage.css

@@ -1,5 +1,7 @@
 .page {
   composes: page from '~./Page.css';
+
+  background-color: var(--pageBackground);
 }
 
 .logoFull {

frontend/src/Components/Page/Page.js

@@ -4,6 +4,7 @@ import AppUpdatedModalConnector from 'App/AppUpdatedModalConnector';
 import ColorImpairedContext from 'App/ColorImpairedContext';
 import ConnectionLostModalConnector from 'App/ConnectionLostModalConnector';
 import SignalRConnector from 'Components/SignalRConnector';
+import AuthenticationRequiredModal from 'FirstRun/AuthenticationRequiredModal';
 import locationShape from 'Helpers/Props/Shapes/locationShape';
 import PageHeader from './Header/PageHeader';
 import PageSidebar from './Sidebar/PageSidebar';
@@ -75,6 +76,7 @@ class Page extends Component {
       isSmallScreen,
       isSidebarVisible,
       enableColorImpairedMode,
+      authenticationEnabled,
       onSidebarToggle,
       onSidebarVisibleChange
     } = this.props;
@@ -109,6 +111,10 @@ class Page extends Component {
             isOpen={this.state.isConnectionLostModalOpen}
             onModalClose={this.onConnectionLostModalClose}
           />
+
+          <AuthenticationRequiredModal
+            isOpen={!authenticationEnabled}
+          />
         </div>
       </ColorImpairedContext.Provider>
     );
@@ -124,6 +130,7 @@ Page.propTypes = {
   isUpdated: PropTypes.bool.isRequired,
   isDisconnected: PropTypes.bool.isRequired,
   enableColorImpairedMode: PropTypes.bool.isRequired,
+  authenticationEnabled: PropTypes.bool.isRequired,
   onResize: PropTypes.func.isRequired,
   onSidebarToggle: PropTypes.func.isRequired,
   onSidebarVisibleChange: PropTypes.func.isRequired

frontend/src/Components/Page/PageConnector.js

@@ -7,10 +7,11 @@ import { saveDimensions, setIsSidebarVisible } from 'Store/Actions/appActions';
 import { fetchCustomFilters } from 'Store/Actions/customFilterActions';
 import { fetchIndexers } from 'Store/Actions/indexerActions';
 import { fetchIndexerStatus } from 'Store/Actions/indexerStatusActions';
-import { fetchAppProfiles, fetchGeneralSettings, fetchIndexerCategories, fetchLanguages, fetchUISettings } from 'Store/Actions/settingsActions';
+import { fetchAppProfiles, fetchGeneralSettings, fetchIndexerCategories, fetchUISettings } from 'Store/Actions/settingsActions';
 import { fetchStatus } from 'Store/Actions/systemActions';
 import { fetchTags } from 'Store/Actions/tagActions';
 import createDimensionsSelector from 'Store/Selectors/createDimensionsSelector';
+import createSystemStatusSelector from 'Store/Selectors/createSystemStatusSelector';
 import ErrorPage from './ErrorPage';
 import LoadingPage from './LoadingPage';
 import Page from './Page';
@@ -48,7 +49,6 @@ const selectIsPopulated = createSelector(
   (state) => state.tags.isPopulated,
   (state) => state.settings.ui.isPopulated,
   (state) => state.settings.general.isPopulated,
-  (state) => state.settings.languages.isPopulated,
   (state) => state.settings.appProfiles.isPopulated,
   (state) => state.indexers.isPopulated,
   (state) => state.indexerStatus.isPopulated,
@@ -59,7 +59,6 @@ const selectIsPopulated = createSelector(
     tagsIsPopulated,
     uiSettingsIsPopulated,
     generalSettingsIsPopulated,
-    languagesIsPopulated,
     appProfilesIsPopulated,
     indexersIsPopulated,
     indexerStatusIsPopulated,
@@ -71,7 +70,6 @@ const selectIsPopulated = createSelector(
       tagsIsPopulated &&
       uiSettingsIsPopulated &&
       generalSettingsIsPopulated &&
-      languagesIsPopulated &&
       appProfilesIsPopulated &&
       indexersIsPopulated &&
       indexerStatusIsPopulated &&
@@ -86,7 +84,6 @@ const selectErrors = createSelector(
   (state) => state.tags.error,
   (state) => state.settings.ui.error,
   (state) => state.settings.general.error,
-  (state) => state.settings.languages.error,
   (state) => state.settings.appProfiles.error,
   (state) => state.indexers.error,
   (state) => state.indexerStatus.error,
@@ -97,7 +94,6 @@ const selectErrors = createSelector(
     tagsError,
     uiSettingsError,
     generalSettingsError,
-    languagesError,
     appProfilesError,
     indexersError,
     indexerStatusError,
@@ -109,7 +105,6 @@ const selectErrors = createSelector(
       tagsError ||
       uiSettingsError ||
       generalSettingsError ||
-      languagesError ||
       appProfilesError ||
       indexersError ||
       indexerStatusError ||
@@ -123,7 +118,6 @@ const selectErrors = createSelector(
       tagsError,
       uiSettingsError,
       generalSettingsError,
-      languagesError,
       appProfilesError,
       indexersError,
       indexerStatusError,
@@ -140,18 +134,21 @@ function createMapStateToProps() {
     selectErrors,
     selectAppProps,
     createDimensionsSelector(),
+    createSystemStatusSelector(),
     (
       enableColorImpairedMode,
       isPopulated,
       errors,
       app,
-      dimensions
+      dimensions,
+      systemStatus
     ) => {
       return {
         ...app,
         ...errors,
         isPopulated,
         isSmallScreen: dimensions.isSmallScreen,
+        authenticationEnabled: systemStatus.authentication !== 'none',
         enableColorImpairedMode
       };
     }
@@ -166,9 +163,6 @@ function createMapDispatchToProps(dispatch, props) {
     dispatchFetchTags() {
       dispatch(fetchTags());
     },
-    dispatchFetchLanguages() {
-      dispatch(fetchLanguages());
-    },
     dispatchFetchIndexers() {
       dispatch(fetchIndexers());
     },
@@ -216,7 +210,6 @@ class PageConnector extends Component {
     if (!this.props.isPopulated) {
       this.props.dispatchFetchCustomFilters();
       this.props.dispatchFetchTags();
-      this.props.dispatchFetchLanguages();
       this.props.dispatchFetchAppProfiles();
       this.props.dispatchFetchIndexers();
       this.props.dispatchFetchIndexerStatus();
@@ -242,7 +235,6 @@ class PageConnector extends Component {
       isPopulated,
       hasError,
       dispatchFetchTags,
-      dispatchFetchLanguages,
       dispatchFetchAppProfiles,
       dispatchFetchIndexers,
       dispatchFetchIndexerStatus,
@@ -283,7 +275,6 @@ PageConnector.propTypes = {
   isSidebarVisible: PropTypes.bool.isRequired,
   dispatchFetchCustomFilters: PropTypes.func.isRequired,
   dispatchFetchTags: PropTypes.func.isRequired,
-  dispatchFetchLanguages: PropTypes.func.isRequired,
   dispatchFetchAppProfiles: PropTypes.func.isRequired,
   dispatchFetchIndexers: PropTypes.func.isRequired,
   dispatchFetchIndexerStatus: PropTypes.func.isRequired,

frontend/src/Components/Page/PageContent.js

@@ -14,7 +14,7 @@ function PageContent(props) {
 
   return (
     <ErrorBoundary errorComponent={PageContentError}>
-      <DocumentTitle title={title ? `${title} - Prowlarr` : 'Prowlarr'}>
+      <DocumentTitle title={title ? `${title} - ${window.Prowlarr.instanceName}` : window.Prowlarr.instanceName}>
         <div className={className}>
           {children}
         </div>

frontend/src/Components/Page/PageContentFooter.css

@@ -2,7 +2,7 @@
   display: flex;
   flex: 0 0 auto;
   padding: 20px;
-  background-color: #f1f1f1;
+  background-color: var(--pageFooterBackground);
 }
 
 @media only screen and (max-width: $breakpointSmall) {

frontend/src/Components/Page/PageJumpBarItem.css

@@ -1,6 +1,6 @@
 .jumpBarItem {
   flex: 1 1 $jumpBarItemHeight;
-  border-bottom: 1px solid $borderColor;
+  border-bottom: 1px solid var(--borderColor);
   text-align: center;
   font-weight: bold;
 

frontend/src/Components/Page/Sidebar/Messages/Message.css

@@ -1,6 +1,6 @@
 .message {
   display: flex;
-  border-left: 3px solid $infoColor;
+  border-left: 3px solid var(--infoColor);
 }
 
 .iconContainer,
@@ -9,7 +9,7 @@
   justify-content: center;
   flex-direction: column;
   padding: 2px 0;
-  color: $sidebarColor;
+  color: var(--sidebarColor);
 }
 
 .iconContainer {
@@ -26,17 +26,17 @@
 /* Types */
 
 .error {
-  border-left-color: $dangerColor;
+  border-left-color: var(--dangerColor);
 }
 
 .info {
-  border-left-color: $infoColor;
+  border-left-color: var(--infoColor);
 }
 
 .success {
-  border-left-color: $successColor;
+  border-left-color: var(--successColor);
 }
 
 .warning {
-  border-left-color: $warningColor;
+  border-left-color: var(--warningColor);
 }

frontend/src/Components/Page/Sidebar/PageSidebar.css

@@ -2,7 +2,7 @@
   flex: 0 0 $sidebarWidth;
   overflow: hidden;
   width: $sidebarWidth;
-  background-color: $sidebarBackgroundColor;
+  background-color: var(--sidebarBackgroundColor);
   transition: transform 300ms ease-in-out;
   transform: translateX(0);
 }
@@ -11,8 +11,8 @@
   display: flex;
   flex-direction: column;
   overflow: hidden;
-  background-color: $sidebarBackgroundColor;
+  background-color: var(--sidebarBackgroundColor);
-  color: $white;
+  color: var(--white);
 }
 
 @media only screen and (max-width: $breakpointSmall) {

frontend/src/Components/Page/Sidebar/PageSidebar.js

@@ -20,9 +20,9 @@ const SIDEBAR_WIDTH = parseInt(dimensions.sidebarWidth);
 const links = [
   {
     iconName: icons.MOVIE_CONTINUING,
-    title: 'Indexers',
+    title: translate('Indexers'),
     to: '/',
-    alias: '/movies',
+    alias: '/indexers',
     children: [
       {
         title: translate('Stats'),
@@ -33,13 +33,13 @@ const links = [
 
   {
     iconName: icons.SEARCH,
-    title: 'Search',
+    title: translate('Search'),
     to: '/search'
   },
 
   {
     iconName: icons.ACTIVITY,
-    title: 'History',
+    title: translate('History'),
     to: '/history'
   },
 

frontend/src/Components/Page/Sidebar/PageSidebarItem.css

@@ -1,21 +1,21 @@
 .item {
   border-left: 3px solid transparent;
-  color: $sidebarColor;
+  color: var(--sidebarColor);
   transition: border-left 0.3s ease-in-out;
 }
 
 .isActiveItem {
-  border-left: 3px solid $themeBlue;
+  border-left: 3px solid var(--themeBlue);
 }
 
 .link {
   display: block;
   padding: 12px 24px;
-  color: $sidebarColor;
+  color: var(--sidebarColor);
 
   &:hover,
   &:focus {
-    color: $themeBlue;
+    color: var(--themeBlue);
     text-decoration: none;
   }
 }
@@ -27,11 +27,11 @@
 }
 
 .isActiveLink {
-  color: $themeBlue;
+  color: var(--themeBlue);
 }
 
 .isActiveParentLink {
-  background-color: $sidebarActiveBackgroundColor;
+  background-color: var(--sidebarActiveBackgroundColor);
 }
 
 .iconContainer {